Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
If your rear battery compartment is located on the port side, like it is on the 212's, then I don't think so. I'm not sure where it is on 2020 AR240's. Probably need closer to 20 feet (15 at least) to make it from the helm compartment to the aft port compartment.
6AWG is likely not large enough, 10ft is likely not long enough, 50amp is likely not enough...... lots of variables here and you're not giving us a whole lot to work with. I would start by searching here; lots of valuable info
If you want the AMP to turn on with the head unit, check the blue wire on the harness. For some reason Yamaha clipped this wire at the factory and I had to buy a new wiring harness.