Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!
You only have until September 30th to get in on this.....So Hurry!

You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

General Discussion

Another 3D print part

Thread starter chileanJK
Start date Mar 24, 2023

chileanJK

Well-Known Member

Mar 24, 2023

When my boat arrived, 4 of the 7 T-Handles of the boat where broken/missing, went to amazon and with shipping to my country, taxes and everything, they will set me back more than 250 bucks, so as all the remains of the lock were intact, I designed a new handle, and started looking for the best filament for boating/sun exposure and ASA where the best I found on forums, started printing in PLA+ a few test to tweak the part and finally printed in ASA natural color (there aren't much colors available), I still haven't decided if I paint it o leave it natural.