Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

General Discussion

Another 3D print part

Thread starter chileanJK
Start date Mar 24, 2023

chileanJK

Jet Boat Lover

Mar 24, 2023

When my boat arrived, 4 of the 7 T-Handles of the boat where broken/missing, went to amazon and with shipping to my country, taxes and everything, they will set me back more than 250 bucks, so as all the remains of the lock were intact, I designed a new handle, and started looking for the best filament for boating/sun exposure and ASA where the best I found on forums, started printing in PLA+ a few test to tweak the part and finally printed in ASA natural color (there aren't much colors available), I still haven't decided if I paint it o leave it natural.