• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • ISLAND JAY has your Jetboaters.net Clothing, hats, stickers and more all at a 30% discount until June. Click Here for more information>SWAG for JetBoaters.net members only

    Help out a new business and show off your love of Jetboating!

    You can dismiss this notice by clicking the "X" in the upper right>>>>

Ar 190 issues

Plinkin

Active Member
Messages
2
Reaction score
0
Points
40
Boat Make
Yamaha
Year
2012
Boat Model
AR
Boat Length
19
Hey guys first time poster here looking for some help. I've got a 2012 ar190 that has around 220 hours on it no major issues until today I pulled it out cleaned it up and headed to the lake. The boat had been sitting for at least 6 months. The main problem is it will not get up to top speed, I usually can get to 40 mph but today it would only get up to 26-30. I also noticed that the rpms seem low it would only get up to 6400 at full throttle. Any advice is appreciated. Thanks.
 
Have you looked at the air filter?

Is the fuel fresh? Ethanol fuel is only good for 30-60 days.
 
I have not looked at the filter, I put 10 gallons in it today. I'm not sure how much gas was in it before. Somethings telling me to change the spark plugs. I'm thinking is doesn't have anything to do with the impeller/pump because it seems to be going the speed it should be for the 6400 rpms I'm getting.
 
Back
Top