• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

AR195 Bimini Question

Geiger41

Jetboaters Captain
Messages
1,159
Reaction score
369
Points
227
Location
Egg Harbor Township NJ
Boat Make
Boatless
Year
NA
Boat Model
Other
Boat Length
NA
Any suggestions on refolding up the Bimini top for trailering. Cant for the life of me get that thing figured out to go back in the fabric case it was stored in while on the tower when I bought it. Contemplating just buying a few bungees wrapping it up and then just bungeeing the hell out of it.... Thoughts. Suggestions ..tips...videos ??
 
Man they are a pain in the butt and I still struggle at times. I have a 2023 AR195. I'll try to help you out here, but I'm no pro.
1. Release the rear pins on the short support tubes on each side, releasing tension. ( the adjustable ones )
2. Pull out the 2 skinny tubes on front of the tower.
3. Push in the fabric on each ends at the very front of the canvas top. You should now have 2 curved sewn in support tubes sticking out about 12" or so, one at each end. This allows the top to be rolled/ folded.
4. Now you can roll the top back in a circular motion until you get to the back of the boat. This may take a few tries as I don't remember if you roll it over or under, but there is a very specific way to get the top compressed small enough to fit in the bag.
5. We find it's best done with 2 people not to scratch the tower.

Good Luck as it can be a pain. Also, the aluminum tubing will scratch your tower up so be aware of that when folding or moving things.
 
Back
Top