• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Audio help

Buckeye Fan

Jet Boat Lover
Messages
60
Reaction score
12
Points
67
Boat Make
Yamaha
Year
2019
Boat Model
X
Boat Length
21
Who can help me with audio? I know what I want, I just don't know what amps I need to power it. Or if you have recommendations or another set up that would sound great in a 212 LTD S. I want the Wetsounds Rev 10's regardless.

2 Westsounds Rev 10
6 Revo 6
1 Reco 10 subwoofer
 
JL Audio M800/8v2 8 channel for all your mids and highs
JL Audio M600/1 Bridged for the sub
pricey but worth it.

If your on a budget buy the M800/8v2 first and do the following until you can get the second one.

2 channels = 2 Revo 6 the for Bow
2 channels Parallel = 4 Revo 6
2 channels = Westsounds Rev 10
2 channels Bridged = Reco 10 subwoofer
 
Wet sounds SDx2 for the Rev10s will give you 400w per speaker. And if you deceide to add a pair of REV 10s it will deliver 300 w to 4 Rev 10s.

HTX4 for the REVO6s will provide 100 w to two Revo 6s in 4 ohm and 75 w to 4 Revo 6s in 2 ohm, orr
HTX6 for the REVO 6s and it will provide 100 w to all 6 revo 6s.

HTX2 for the subwoofer as it will provided 600 watts to a 4 ohm subwoofer when bridged.
 
To echo what @PaulyB said..... Wetsounds SDX2 for the REV 10's. It will handle 2 or 4 no problem. Wet sounds SDX6 for the the Revos and bridge the channel 5 and 6 for the sub.
 
Thanks everyone appreciate all the help!
 
You could also consider two Syn DX 6's, or one Syn DX 6 and one HTX 6 configured as follows:

Syn DX 6: Channels 1-4 bridged for the Rev 10's, channels 5/6 bridged for the sub

HTX 6: one channel each for the Revo 6's.

I'm running six Revo 6's off an HTX 6 and they sound great, along with Rev 8's on a bridged HTX 4. Lots of clean sound, and LOUD if we want it to be.

Jeff
 
Who can help me with audio? I know what I want, I just don't know what amps I need to power it. Or if you have recommendations or another set up that would sound great in a 212 LTD S. I want the Wetsounds Rev 10's regardless.

2 Westsounds Rev 10
6 Revo 6
1 Reco 10 subwoofer
What did you do and how does it sound?
 
Back
Top