jgourlie
Jet Boat Junkie
- Messages
- 220
- Reaction score
- 113
- Points
- 132
- Location
- Alberta Canada
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- AR192
- Boat Length
- 19
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
would you happen to have a part number for them at bass pro?You can get them at bass pro shop or a boat place. We keep extras in the glove box when the tether let go and became one with the bottom.
No sir I just took the old onegood to know...I will try and check out Bass Pro
would you happen to have a part number for them at bass pro?
@ross l I think this is going to work perfect!I use a golf tee.
I just test fitted it this morning. I only use plastic golf tees so they should be better than wood. I have to pound the pole into the bracket with a hammer because my Bimini is so tight as is, I was thinking that I probably wouldn’t need a pin anyways. The tee should be great. I will let you know if it works@jgourlie I wasn’t sure if you were kidding about the golf tee. I like that simple idea and might try it as well. I just want to make sure it’s not going to break on me at high speeds and hurt someone or the boat. Have you had good luck with them?
I use a pin and it goes in without hammering. Just have to lift the pole to take the pressure off of it. Golf tees might be a little easier than a blunt pin.I just test fitted it this morning. I only use plastic golf tees so they should be better than wood. I have to pound the pole into the bracket with a hammer because my Bimini is so tight as is, I was thinking that I probably wouldn’t need a pin anyways. The tee should be great. I will let you know if it works