Blacktip elite WAVE pattern 2008 sx230

[Jon Gottschalk]

So I have had several SX230s and always gone with Elite blacktip classic in Gray/black. I picked up a 2008 SX230 with only 60 hours and gave here the whole 9 yards and went with the Elite wave pattern as the boat is a little on the edgy side compared to average SX230. I loved the install on the tower (came with boat) and the guy hit a homerun on the mount position; monster tower that I see on other SX230s but is positioned I think just right a bit further foward. The lines flow so well with the new graphics I installed.

Anyway, wanted to show of the WAVE elite as I have not seen anyone else do it. I love it for the wake look.....if anyone needs the hookup on them send me a PM...

 

[suke]

Were those custom or a kit you can buy?

 

[Jon Gottschalk]

These are custom but you can buy them. Most if not all people buy the "Classic" pattern the Seadek uses too. They have a wood plank look and are super nice looking; I have done 3 boats in Classic Gray/black and alot of people also go Toffee/black for a brownish wood hue (pic attached). I also have my 2006 sx230 and 2008 sx210 that I did a few years ago in the classic. I love the classic and is definetely the most refinded looking for the limiteds and regular sx230/240s, but for like the AR or X boats I could not wait to jazz it up with something a bit wilder....

With my 2008 SX230 watersports boat, like yours, I feel like the AR is wilder and wanted to try something different with the mats. I was really torn between wave pattern and the retro square; the retro kinda of matched my decals but in the end thought they were too busy on the big boat. You can make them anyway you want for $720 for complete kit (interior and exterior) The Blacktip elite as I am sure has been discussed quite a bit is identical to Seadek and a much better price.

Here are the options (yes I sell these but do not want to step on anyones toes):

 

[Adrian @ JB Solutions]

Looks great -

But I am more interested in the tower. Did you add it your self?

 

[suke]

These are custom but you can buy them. Most if not all people buy the "Classic" pattern the Seadek uses too. They have a wood plank look and are super nice looking; I have done 3 boats in Classic Gray/black and alot of people also go Toffee/black for a brownish wood hue (pic attached). I also have my 2006 sx230 and 2008 sx210 that I did a few years ago in the classic. I love the classic and is definetely the most refinded looking for the limiteds and regular sx230/240s, but for like the AR or X boats I could not wait to jazz it up with something a bit wilder....

With my 2008 SX230 watersports boat, like yours, I feel like the AR is wilder and wanted to try something different with the mats. I was really torn between wave pattern and the retro square; the retro kinda of matched my decals but in the end thought they were too busy on the big boat. You can make them anyway you want for $720 for complete kit (interior and exterior) The Blacktip elite as I am sure has been discussed quite a bit is identical to Seadek and a much better price.

Here are the options (yes I sell these but do not want to step on anyones toes):

WOAH! That's like half the price of seadek. Off to google to see where you can buy these.

 

[suke]

Ah, does not look like they make them for a 212x.

Although this lists my boat: Amazon.com: Yamaha Jet Boat Complete Traction Mats 2006-2011 AR210,SX210 / 2006-2007 SR210 / 2008-2010 212X,212SS: Automotive

It doesn't quite look my mat pattern. Although this also lists my boat under applications:

2006-07 SR210, 2006-10 AR210 Complete Mat Kit

Check out the deal on 2006-07 SR210, 2006-10 AR210 Complete Mat Kit at Watercraft Superstore

www.watercraftsuperstore.net

 

[Jon Gottschalk]

What year 212? I have them for up to 2011....

 

[Jon Gottschalk]

Looks great -

But I am more interested in the tower. Did you add it your self?

Tower came with the boat when I bought and is Monster tower. Whole package with speakers, bimini, wet sound speakers, 2 racks was around $2700. You can buy a nice combo with less stuff but the bimini is nice in that it can go up to 45 mph but not ton of shade. The thing that makes this tower look so good is the location he set it up. It is farther foward and use existing holes where the rear grab handles were. The tower can then lean a bit further foward and is better balanced looked compared to some other aftermarket towers.....here is link

Monster Wakeboard Tower and Bimini Package

 

[suke]

What year 212? I have them for up to 2011....

2009 212x....if I dig further in the applications it shows they have it for my boat, just the image doesn't quite look like my layout. I'm guessing that's just to give you an idea of all the pieces, but may not be 100% exact?

 

[Jon Gottschalk]

2009 212x....if I dig further in the applications it shows they have it for my boat, just the image doesn't quite look like my layout. I'm guessing that's just to give you an idea of all the pieces, but may not be 100% exact?

Sorry for the delayed response as my email is older and don't check that often. 2009 212x will be exact fit.....like a glove and have personally installed on 2009

 

[suke]

Sorry for the delayed response as my email is older and don't check that often. 2009 212x will be exact fit.....like a glove and have personally installed on 2009

Roger that! I've ordered quite a few parts from watercraft superstore. I'll wait until their black friday 50% off sale and knock it out in the off season.

 

[Jon Gottschalk]

Yeah, can't beat that if you can wait. Even beats dealer cost for them.....

 

[suke]

Yeah, can't beat that if you can wait. Even beats dealer cost for them.....

I'm in no rush to begin a project like that during peak boating season. My factory carpet is fine, and my rear swim deck is hanging on. Starting to come up a little in one of the corners, but all in all it's in good shape.

 

[MacAR210]

So your saying during Black Friday watercraft superstore offers 50 percent off everything even their blacktip mat kits? I was about to buy one but can hold off for the dis punt if that’s the case.

 

[Jon Gottschalk]

The Blacktip stuff is 50% off on black friday and if you can wait, wait. They also have new 2 tone mats for the groove cut that are priced inexpesively, but for 50% off the elite, or around $360, can't beat that. You are getting seadek stuff for 1/3 of the cost.

 

[Jon Gottschalk]

2 tone.....

 

[MacAR210]

Yes I was looking at the elite mat kits. Full kit showed $723. I’ll for sure wait till Black Friday if I can get it for half! Thanks!

 

[suke]

Yes I was looking at the elite mat kits. Full kit showed $723. I’ll for sure wait till Black Friday if I can get it for half! Thanks!

Exactly!

The Blacktip stuff is 50% off on black friday and if you can wait, wait. They also have new 2 tone mats for the groove cut that are priced inexpesively, but for 50% off the elite, or around $360, can't beat that. You are getting seadek stuff for 1/3 of the cost.

That was my thought process. No doubt seadek is quality material, but 3x more? I find that hard to believe.

 

[suke]

Yes I was looking at the elite mat kits. Full kit showed $723. I’ll for sure wait till Black Friday if I can get it for half! Thanks!

Sale starts at midnight. Unfortunately this is the first year ever it hasn't been 50% off. Even still at ~$500 for elite mats it's still a steal. We're gonna hop on it. Forgot to mention it's 30%.

 

[MacAR210]

I’m going to get a complete elite kit also