Joshb723
Jetboaters Lieutenant
- Messages
- 53
- Reaction score
- 25
- Points
- 152
- Location
- Winter Haven, FL
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- SS
- Boat Length
- 21
I blew a bearing seal on my trailer. Where can I order a new one?
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Blown bearing seal
- Thread starter Joshb723
- Start date
Monterro
Jet Boat Addict
- Messages
- 116
- Reaction score
- 55
- Points
- 97
- Location
- Virginia Beach
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- SX
- Boat Length
- 21
Pacifictailers.com is my go to place for my trailer parts. I have a MFI trailer. Also most auto stores stock them if you can find the specs on them. Good to keep a couple on hand.
itsdgm
Jetboaters Admiral
- Messages
- 3,699
- Reaction score
- 3,228
- Points
- 417
- Location
- Rancho Santa Margarita, California
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 21
Joshb723
Jetboaters Lieutenant
- Messages
- 53
- Reaction score
- 25
- Points
- 152
- Location
- Winter Haven, FL
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- SS
- Boat Length
- 21
How do I get the part numbers?
Gym
Jetboaters Admiral
- Messages
- 3,258
- Reaction score
- 2,661
- Points
- 352
- Location
- Falmouth, MA (Cape Cod)
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- SX
- Boat Length
- 23
If you pull the bearing the # should be stamped on the outer race
The bearing # should be stamped on the inner bearing race.
mb300sd
Jet Boat Junkie
- Messages
- 77
- Reaction score
- 56
- Points
- 127
- Location
- Athens, GA
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- AR
- Boat Length
- 23
You need a 1.719 ID / 2.565 OD grease seal. NAPA should be able to look it up, or if you have a tractor supply near by,
http://www.tractorsupply.com/tsc/product/carry-on-trailer-double-lip-seal-2567-in-od-x-1719-in-id
http://www.tractorsupply.com/tsc/product/carry-on-trailer-double-lip-seal-2567-in-od-x-1719-in-id
