BOATS & BIKES

[LoWeLL216]

2016 Road Glide

During the summer it's always a fight on what to use more of.

Well done. I understand the conflict.

 

[vwallat99]

Wow very nice. Looks like you don't have only a few months to enjoy everything though! I need that

 

[TommyMcK]

Trailered one of the bikes down here to SW Florida to stay.

 

[LoWeLL216]

View attachment 214400
View attachment 214401
Trailered one of the bikes down here to SW Florida to stay.

I love R18s. Almost bought one to replace my K1600B.

 

[Neutron]

Started tearing into the H2 today.
Pulled the carbs to clean them out
Gonna send the tank out to get restored if i can't find a decent replacement.
Verified spark is good on all 3 cylinders.
Pistons look rough so i am going to pull the engine and rebuild it.
Found the owners manual under the tail lamp, and the 3 original replacement spark plugs still in its holder

 

[SantaFeTrailer]

I love how those pipes follow the lines of the bike

Finished working on the Victory a few months ago but never had time to post about it.

Added flush mount turn signals front and rear.
View attachment 211773
View attachment 211775

Did a Llyods Torque Tube Intake with twin filters, and a Power Commander V with custom tune.
View attachment 211776
View attachment 211777

And an RPW slash cut exhaust with O2 delete.
View attachment 211774
Also not pictured, I went with a Metzler 250 rear tire and added 4in forward controls.

It hasn't been Dyno tested yet, but based on the same mods being done on other hammers, Lloyds estimates apporx. 122hp vs the stock 96hp. It definitely has a really noticable seat of pants difference.

 

[SantaFeTrailer]

You know that you are probably going to die in a firy crash just from having that in your shop right? I mean, still worth it and all.

Started tearing into the H2 today.
Pulled the carbs to clean them out
Gonna send the tank out to get restored if i can't find a decent replacement.
Verified spark is good on all 3 cylinders.
Pistons look rough so i am going to pull the engine and rebuild it.
Found the owners manual under the tail lamp, and the 3 original replacement spark plugs still in its holder
View attachment 215032View attachment 215033View attachment 215034View attachment 215035View attachment 215036View attachment 215037

 

[Neutron]

You know that you are probably going to die in a firy crash just from having that in your shop right? I mean, still worth it and all.

Yup worth every second.
Probably not drive it much but will restore it and add it to the pile of stuff my grandkids get when I am ashes lol

 

[Be O Be]

The good old days!!!

 

[Neutron]

After my H2 engine tear down, i was sure i was going to have to bore the cylinders because the center one that was destroyed looked like this


But after some patience with some muriatic acid, a razor blade and scotch bright. It looked good so i used 3 different ball hones ending with a 600 grit hone, this is the end result
All still within stock spec.


Ordering pistons and gaskets and it will be back together and running soon

 

[Neutron]

Finally got to spend a few hours on the H2 today
Got the top end back together and bled the oil injection. Hopefully this weekend i can put the exhaust back on, then the carbs then fire it up on the fuel bottle.

 

[Neutron]

She is running finally
H2 first startup in 32 years

 

[TommyMcK]

 

[F.M.]

Added a new toy to the garage yesterday. The misses gave me permission to purchase an early Father’s Day and birthday gift for myself. Well she actually handed over the money so she could say that she purchased it as a gift for me.

2022 Ducati Streetfighter V4SP



And she said I can keep my Hammer S!

 

[F.M.]

Installed a Termignoni exhaust and a T800 UpMap with the MTorque tune on my Ducati. Should be pushing around 230hp now. It was a rocket before, but now it’s insane.

Factory vs Termignoni

 

[Neutron]

Installed a Termignoni exhaust and a T800 UpMap with the MTorque tune on my Ducati. Should be pushing around 230hp now. It was a rocket before, but now it’s insane.

Factory vs Termignoni
View attachment 223335

View attachment 223336

Is it 2 seperate pipes. Looks like there is another on the left side. Looks great ?
Something very sexy about a single sided swing arm

 

[F.M.]

Is it 2 seperate pipes. Looks like there is another on the left side. Looks great ?
Something very sexy about a single sided swing arm

Yeah. The front two cylinders exit on the right side back two on the left.

I love the single sided swing arm too. What sold me on it was the sound of the dry clutch.

 

[Neutron]

Yeah. The front two cylinders exit on the right side back two on the left.

I love the single sided swing arm too. What sold me on it was the sound of the dry clutch.

View attachment 223357

Yup dry clutches are a very unique cool sound