• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

DIY Ballast

Jkuhn4

Member
Messages
5
Reaction score
3
Points
12
Boat Make
Yamaha
Year
2014
Boat Model
AR192
Boat Length
19
What are y’all using for ballast? Looking for cheap ways to make a good surfing wave.
 

Cambo

Jetboaters Captain
Messages
1,283
Reaction score
900
Points
227
Location
Long Island
Boat Make
Yamaha
Year
2017
Boat Model
242X E-Series
Boat Length
24
Buy some pumps and bags from wake makers especially the rear swim deck bag it will be about $1,500.00 to $3,000.00 depending on the set up this is cheap in relation to buying a used wakeboard boat for 80k to 100K
 

MNJets

Jet Boat Addict
Messages
28
Reaction score
26
Points
87
Location
Bemidji, MN
Boat Make
Yamaha
Year
2019
Boat Model
X
Boat Length
21
I own a 2019 212X and poorly surfed behind the boat for 3 years. This summer I finally purchased a 725# ballast bag for the transom ($450 from Hodges Marine) along with a Tsunami pump from Bart's Water Sports for maybe $225. Inventory is the issue so it took me a while to piece these components together because they were not available at Wake Life or Wakemakers. I'm 200# and can now surf on a shorter board (52" to 54") with only 1 to 2 people in the boat which would have been impossible last year. I also use the Wake Boost so it's not only the ballast but the above was pretty inexpensive.
 

jcyamahariders wife

Jetboaters Captain
Messages
549
Reaction score
884
Points
242
Location
Rosebud, MO
Boat Make
Yamaha
Year
2017
Boat Model
242X E-Series
Boat Length
24
What are y’all using for ballast? Looking for cheap ways to make a good surfing wave.
What year boat and length you are trying to set up ? Definitely talk to Jerry @jcyamaharider with Gantlin Products. He has helped so many people get their yamaha boats set up for surfing. Either message him on the board or his contact info is on his website.
 

Jkuhn4

Member
Messages
5
Reaction score
3
Points
12
Boat Make
Yamaha
Year
2014
Boat Model
AR192
Boat Length
19

fiendi5h

Jet Boat Addict
Messages
24
Reaction score
42
Points
122
Location
Port Elgin ON
Boat Make
Yamaha
Year
2014
Boat Model
AR
Boat Length
24
You want real low budget?

Get some rubbermaid roughneck storage bins. Fill with water and place on swim deck. I can usually fill them half way from the lake an lift them up then fill the rest with a bucket. Three or four bins makes a noticeable difference.
 

Farny

Jetboaters Commander
Messages
1,117
Reaction score
939
Points
197
Location
Spring TX
Boat Make
Centurion
Year
2022
Boat Model
Other
Boat Length
23
You want real low budget?

Get some rubbermaid roughneck storage bins. Fill with water and place on swim deck. I can usually fill them half way from the lake an lift them up then fill the rest with a bucket. Three or four bins makes a noticeable difference.
LOVE IT!!!!!! Winner!!!! Faster fill faster drain!!!!
 

jcyamahariders wife

Jetboaters Captain
Messages
549
Reaction score
884
Points
242
Location
Rosebud, MO
Boat Make
Yamaha
Year
2017
Boat Model
242X E-Series
Boat Length
24
You want real low budget?

Get some rubbermaid roughneck storage bins. Fill with water and place on swim deck. I can usually fill them half way from the lake an lift them up then fill the rest with a bucket. Three or four bins makes a noticeable difference.
Our friend Mark did that with his yamaha about 11 years ago. They started with tubs and moved on to ballast bags. Then he hooked us on surfing and the rest was history. Gantlin Products got started not long after. Just a couple of guys with dreams of making a better wave. Can't believe it's been that long already.
 
Top