• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Engine bay/storage area panel material

haknslash

Jetboaters Fleet Admiral
Messages
7,585
Reaction score
9,030
Points
567
Location
Lake Martin, AL
Boat Make
Moomba
Year
2019
Boat Model
Other
Boat Length
23
Is it treated wood or fiberglass under the carpeted wall sections on the side of the engine/rear storage areas? I plan on finally mounting my onboard charger this week and I haven't peeked at the panels a lot to see what's under the carpet. I imagine it's treated wood but just want to confirm. I'm going to use stainless hardware of course.
 
My 08 is plywood most likely treated. I'm sure it's the same as newer units.
 
Yes, those bulkheads are plywood covered with carpet.
 
Back
Top