Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

FYI. 2018/2019 shorelandr that came with my 2018 242x.

Thread starter NORCAL-GAS
Start date Jul 14, 2018

NORCAL-GAS

Jet Boat Addict

Jul 14, 2018

My 2018 242x came with the shorelandr trailer. The ufp a-60 coupler had the breakaway cable pulled. So while replacing it I noticed that our trailers come with the back up electronic actuator (my ground wire was extremely loose). Also, the routing of the breakaway cable has changed. The new route is around the shock absorber post. The old way ufp stayed that the wire could get bound up along the side.