Zechbruder
Jet Boat Lover
- Messages
- 57
- Reaction score
- 47
- Points
- 77
- Location
- Dallas, Texas
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- SX
- Boat Length
- 21
Hello all,
2019 Yamaha SX210
I am curious of how much water in the bilge is supposed to activate the automatic feature that is talked about in the manual.
I trailer my boat. My pump is powered only when my 4 position (off, 1, 2, 1+2) battery switch is in the on position. The bilge pump runs when I turn the helm switch on, it does not stop running (only ran it dry for 30 seconds, waiting for it to auto-off)
Today, I filled the bilge until the pump was mostly covered, no auto activation. I switched the helm switch on, pumped out the water, waited for it to cycle off for a bit, turned off helm switch to prevent it from burning while dry.
Thoughts?
2019 Yamaha SX210
I am curious of how much water in the bilge is supposed to activate the automatic feature that is talked about in the manual.
I trailer my boat. My pump is powered only when my 4 position (off, 1, 2, 1+2) battery switch is in the on position. The bilge pump runs when I turn the helm switch on, it does not stop running (only ran it dry for 30 seconds, waiting for it to auto-off)
Today, I filled the bilge until the pump was mostly covered, no auto activation. I switched the helm switch on, pumped out the water, waited for it to cycle off for a bit, turned off helm switch to prevent it from burning while dry.
Thoughts?
Last edited: