Hydrosilex

[Emptytemples]

Hello All,

Can't wait to order and try Rejex as everyone talking very highly of it. Was always on the Cullinite band wagon but will try rejex with AR250 being delivered in a few days . Question is, has anyone heard of or used hydrosilex products? Can anyone give a comparison to rejex or other products they have used?

I don't know much about hydrosilex but my dad has an old timer friend in Hawaii and he swears by the stuff for his hot rod, motorcycle, cars etc. Was curious what the temperature was on it in the forums if there is any. . .

 

[lazergeek]

I have been using it for the last 2 years on my boat since it was new. It works great and have been very happy with it. Im in 100% salt water. I used with there rewind product for prep before applying.

My 1st bottle is about empty but Im going to switch to 303 Graphene Nano instead. The graphene produces smaller water beads.

 

[Emptytemples]

Thank you. Did just see previous thread you had posted in as well. Apologies for the similar thread. Might finish up the bottle of the hydro my dad has in the garage before trying the rejex. Do you think I should go with the rewind for new hull or would be ok with the hydrosilex marine by itself on the hull? May still end up cullinite on the interior walls and such.

Wax on wax off . . .

 

[lazergeek]

Thank you. Did just see previous thread you had posted in as well. Apologies for the similar thread. Might finish up the bottle of the hydro my dad has in the garage before trying the rejex. Do you think I should go with the rewind for new hull or would be ok with the hydrosilex marine by itself on the hull? May still end up cullinite on the interior walls and such.

Wax on wax off . . .
View attachment 200455

You may be able to get away with just Dawn dish soap and water then rinse and dry. Im sure the Gel coat as a little wax on it from the factory which is what you want to remove and probably wipe down with some form of alochol.