• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Ideal tow rope length for wake boarding from tower

camoto

Jet Boat Addict
Messages
55
Reaction score
28
Points
97
Location
Plymouth, MA
Boat Make
Yamaha
Year
2014
Boat Model
AR
Boat Length
19
What tow rope length are you guys finding to be ideal from an AR? It seems too short and you're in the jet spray (but in the better wake) and too long and you are just the opposite. I tried to play with lengths a bit last season but didn't settle on a good length.
 
Id like to know this as well.
 
I use a 75'er - with multiple 10' sections. Removed 1 section and settled on 65'. We also tried 55' - but my kids preferred 65'.

That said - it's very rare anyone is ever directly behind the jet wash. They're usually far out to 1 side or the other or back and forth clearing (attempting) wake to wake.

I do notice less jet wash when my ballasts are full. Probably cause my transom is so much lower when full, nozzles are deeper.

Oh - and before my 212x, I had a 12' AR190 - same rope used at the same lengths.
 
That's good to know...I was wondering the same thing. I think our kids are ready for a wake board this season.
 
It depends. There is no perfect length for everybody and every boat. If your objective is to be out of jet wash then obviously longer, but our objective is to hit the best part of the wake in terms of size, shape, and width...jetwash is of no concern as we really don't ride in center.
 
Following this thread. We are going to start introducing wakeboarding to my boys this year. In fact, I just ordered a Hyperlite Motive 119 for them last week.....then proceeded to find another one here locally for a good deal. Anyone in the market for one of them? As soon as it comes in, I'll be selling it.
 
65 puts the wake at a decent width for an intermediate to clear yet far enough apart for a beginner to jump a single wake without pounding into the second wake. Shorten to 55 for beginners learning to go wake to wake.

Speed is just as important, when attempting new tricks, lay off the throttle slightly mid trick to limit the pounding on crashes ( especially on rotations). Start slower (14-16) and work your way up.

Pair rope length with speed to find the sweet spot for the riders skill.
 
We ride between 55-60, which leaves us in the biggest wake from 18-20mph and being in the jet is not issue since we do spend most of the time outside of the wake.
 
I would only add that folks are throwing out length without regard for forward or rear swept tower or boat type. There could be a big difference depending on boat and tower type.
 
Back
Top