F.M.
Jetboaters Admiral
- Messages
- 1,475
- Reaction score
- 2,380
- Points
- 287
- Location
- Decatur, AL
- Boat Make
- Yamaha
- Year
- 2024
- Boat Model
- 255XD
- Boat Length
- 25
After hours of scouring over and through the site, I finally made a decision on what I wanted and got it ordered, I finally got around to installing it today. I've been putting it off because I was hesitant about doing the DVSR mod. I always second guess myself on electrical work, especially when it involves snipping wires.
When I took the time to read and re-read the info here on the forum over and over again, I had to sit and draw my own diagram of the DVSR, and it finaly made sense and it ended up being a fairly straight forward mod and install. And I even found a way to route the cord through the engine compartment and out of the wet storage area behind the swin deck seats, without cutting any holes in anything.
I've got to say big thanks to everyone that posts here, the information shared here is priceless when working on my boat. So thanks to all that contribute.
When I took the time to read and re-read the info here on the forum over and over again, I had to sit and draw my own diagram of the DVSR, and it finaly made sense and it ended up being a fairly straight forward mod and install. And I even found a way to route the cord through the engine compartment and out of the wet storage area behind the swin deck seats, without cutting any holes in anything.
I've got to say big thanks to everyone that posts here, the information shared here is priceless when working on my boat. So thanks to all that contribute.
