SOLD JBP Lateral Thrusters

[Cray16]

Set of nearly new Lateral Thruster's (1 season). Currently on a 2007 230 but should work for most.
Pulled the pumps to work on my impellers and decided to go another direction.

$300 shipped USPS from Utah

 

[Wisefam22]

I dont need to spend any more money, I dont need to spend any more money..

Watching thread.

 

[spaz1868]

Is the Thrust Vector XV required to install the Thrust Vectors? I have the older Thrust Vector XL’s on our boat.

 

[Jgorm]

What didn't you like about them?

 

[spaz1868]

I'm interested. I just want to make sure it will work with the Thrust Vector XL's.

 

[Beachbummer]

Can you clarify... Lateral Thrusters are the metal pieces that empowers reverse to push the boat sideways when steering. Thrust vectors are the blue/white starboard pieces keeping the steering straight when going slow. Which of the items in the picture are you selling? Only the Lateral Thrusters? What about the Thrust Vectors in the picture?

Good Luck with the sale.

 

[Cray16]

Is the Thrust Vector XV required to install the Thrust Vectors? I have the older Thrust Vector XL’s on our boat.

No you do not need the XV. They can be installed without any fin.

 

[Cray16]

Can you clarify... Lateral Thrusters are the metal pieces that empowers reverse to push the boat sideways when steering. Thrust vectors are the blue/white starboard pieces keeping the steering straight when going slow. Which of the items in the picture are you selling? Only the Lateral Thrusters? What about the Thrust Vectors in the picture?

Good Luck with the sale.

I’m selling both. (Thrust vectors in another thread) The lateral thruster is the horn shaped metal piece on the bottom that pushes the stern when in reverse.

Lateral Thruster Twin Engine

 

[Cray16]

More pictures to clarify.

 

[Wayloncle]

I'm interested. I just want to make sure it will work with the Thrust Vector XL's.

They will work with XL’s but you have to trim a little bit of the fin. JBP will send you the template to trim them. I did this with mine, I used my dremel to trim them it looks factory cut.

 

[capt]

Pm sent