We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Been having ladder sticking problems for a couple years now. Been doing what I can with a filer to grind the slide rail which helps for about a month or so each time. However, the location and angle makes it difficult to grind.
My Question: If I unbolt the brackets (bolted to the hull) are these self tapped bolts or is there a nut on the other side that I need to worry about?
The bolts on mine seem bent and it angles under the boat a bit, which is awkward. I am curious if any of the ones they currently list could work. I’ll have to look into it deeper sometime.