• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • ISLAND JAY has your Jetboaters.net Clothing, hats, stickers and more all at a 30% discount until June. Click Here for more information>SWAG for JetBoaters.net members only

    Help out a new business and show off your love of Jetboating!

    You can dismiss this notice by clicking the "X" in the upper right>>>>

Link to Taylor made anchor shade review

Checked it out on Amazon, too. Basically, get it from Overtons. Amazon prices varied widely based on colors. Most are $202. Overtons is $130.
 
The tower setups on an AR vs an LS are very different. And those of us with an SX are SOL I suppose, as the support comes mostly from the tower doesn't it? Seems you could just open the bimini, and lay it across it, extending it either forward or aft per your desire however. Anyone done that?
 
Actually, I don't think the support comes from the tower at all. They just are overlapping it. This is like an umbrella that is square, with lines off of each corner of the square that go to the cleats. The lines to the cleats pull the umbrella down against the pole in the center.

Now, I do think you will need a base to put under it if you have SeaDek...
 
Cool find!
Thanks
 
Back
Top