• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Lowrance HDS 9 3 in 1 transducer install

C

crmoncada

Active Member
Messages
1
Reaction score
0
Points
30
Boat Make
Yamaha
Year
2019
Boat Model
242 Limited S E-Series
Boat Length
24
looking for suggestions on location to mount a lowrance 3 in 1 transducer (12 in long) given the hull design of the 2019 242x e series and perhaps how the wire was run from the console to the transducer, my conserne is how much affect the turbulence from the jet
 

Attachments

J

JoeQ

Member
Messages
1
Reaction score
0
Points
20
Boat Make
Yamaha
Year
2019
Boat Model
242 Limited S E-Series
Boat Length
24
crmoncada said:
looking for suggestions on location to mount a lowrance 3 in 1 transducer (12 in long) given the hull design of the 2019 242x e series and perhaps how the wire was run from the console to the transducer, my conserne is how much affect the turbulence from the jet
Click to expand...
Have you had any luck on installing your lowrance? I have the same model of lowrance and I am looking for the proper way to mount it in my 2019 242 limited S
 
You must log in or register to reply here.
Top