Picture of pumps out of the water at speed

Scottie

Jetboaters Commander

Jun 25, 2018

#1

Can anyone find the picture that shows the pumps out of the water at speed? The one I saw was a twin engine, but I can't find it now. I think it was @swatski or maybe @JetBoatPilot that posted the first one I saw. Thanks!

THE 2013 212x

Performance:
Ribbon/snorkle delete; blower upgrade (2x spal fans); L13 cones; 6CW impellers; delrin wear rings;
Electrical/electronics:
RideSteady/Hydrophase GPS Speed Control; 150A Helm Aux 12V Circuit w/fused panel; Onboard NOCO 2-bank charger w/NOCO Outlet; LED nav light; wired LED tow point anchor light; Triple RGB transom light; 4 zone interior RGB LED lighting; One-Off custom dash cap and instrument panel with flushmount SIMRAD Go7 and temperature gauges for each engine. Custom lower switch panel for lighting w/ Blue Sea voltmeter; Custom blue rocker switches on Blue Sea dimmer; Relocated no wake mode switch to throttles; Relocated battery switch to custom enclosure for easy access; Push-button start kit from @mainah;
Audio:
Sony DSX-M80 w/ wired swimdeck remote; 6x JL mx650; 6x 10" subwoofers JL M1IB5; 4x JL 770 tower speakers; 3 JL marine amps (2x m600/1 and 1 m800/8v2);
Handling:
Throttlesync; Cobra Steering; JBP lateral thrusters;
Wake:
WakeWedge; Custom swimdeck bag from @jcyamaharider; 3x 800lbs fully integrated ballast; Quick connect auxilliary fill port; 4x Jabsco Ballast King pumps. 4x 1" thru hull intakes. 3200 lbs of ballast in 6 minutes or less.
Cabin/Hull/Misc:
EZ locks; additional factory cleats; bow/ladder grab handles; gas strut and slam latch for anchor locker; Gem Products stainless latches throughout; longer gas strut for ski locker (opens fully); Mini strut for passenger glove box; Garelick hydraulic seat post; BolsterBuddy; Seadek Full Set w/ custom/extra Pcs; Yamaha swivel board rack w/ custom fork; Premium Yamaha Cover; Hangtyte System; Billet bilge/bypass fittings; Stainless scupper; Fortress FX-7 anchor modified to fit factory locker;

Scottie

Jetboaters Commander

Jun 25, 2018

#2

Found it! Photo credit @Williamsone46

Last edited: Jun 25, 2018

THE 2013 212x

Performance:
Ribbon/snorkle delete; blower upgrade (2x spal fans); L13 cones; 6CW impellers; delrin wear rings;
Electrical/electronics:
RideSteady/Hydrophase GPS Speed Control; 150A Helm Aux 12V Circuit w/fused panel; Onboard NOCO 2-bank charger w/NOCO Outlet; LED nav light; wired LED tow point anchor light; Triple RGB transom light; 4 zone interior RGB LED lighting; One-Off custom dash cap and instrument panel with flushmount SIMRAD Go7 and temperature gauges for each engine. Custom lower switch panel for lighting w/ Blue Sea voltmeter; Custom blue rocker switches on Blue Sea dimmer; Relocated no wake mode switch to throttles; Relocated battery switch to custom enclosure for easy access; Push-button start kit from @mainah;
Audio:
Sony DSX-M80 w/ wired swimdeck remote; 6x JL mx650; 6x 10" subwoofers JL M1IB5; 4x JL 770 tower speakers; 3 JL marine amps (2x m600/1 and 1 m800/8v2);
Handling:
Throttlesync; Cobra Steering; JBP lateral thrusters;
Wake:
WakeWedge; Custom swimdeck bag from @jcyamaharider; 3x 800lbs fully integrated ballast; Quick connect auxilliary fill port; 4x Jabsco Ballast King pumps. 4x 1" thru hull intakes. 3200 lbs of ballast in 6 minutes or less.
Cabin/Hull/Misc:
EZ locks; additional factory cleats; bow/ladder grab handles; gas strut and slam latch for anchor locker; Gem Products stainless latches throughout; longer gas strut for ski locker (opens fully); Mini strut for passenger glove box; Garelick hydraulic seat post; BolsterBuddy; Seadek Full Set w/ custom/extra Pcs; Yamaha swivel board rack w/ custom fork; Premium Yamaha Cover; Hangtyte System; Billet bilge/bypass fittings; Stainless scupper; Fortress FX-7 anchor modified to fit factory locker;

ruztew

Jetboaters Lieutenant

Jun 26, 2018

#3

Here's a video that jetboatpilot made showing the same thing