Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Electronics-Stereo/GPS/Chartplotter/Electrical etc

Power pins on the tach

Thread starter wmabde0
Start date May 27, 2024

wmabde0

Member

May 27, 2024

I have a 2012 242 limited S. Does anyone know the power, ignition/acc and ground pins are on the tachometer? I suspect it is on the 4 pin conntector.
I am trying to bench power them and the boat is not working so I can't plug them straight into the boat to power them.

I have looked in the service manual in the electrical section but it was of no help. Pics of the front and back are attached of the tach, I am asking about.

Thanks in advance