• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Question for those with modified towers to enter 7 foot tall garage door

jgpncll

Jet Boat Lover
Messages
53
Reaction score
12
Points
82
Location
Raleigh NC
Boat Make
Yamaha
Year
2017
Boat Model
AR
Boat Length
19
I had to remove my wakeboard rack because of my tower modification on my 2017 AR190

Does anyone out there that has done the tower modification have a photo or a video of a swivel wakeboard rack that stays on the tower when folded below the windshield?

Or, do the swivel racks mount to the smaller 1 7/8 inch rear tube?
 

icemanj16

Well-Known Member
Messages
47
Reaction score
21
Points
47
Boat Make
Yamaha
Year
2019
Boat Model
AR195
Boat Length
19
Following... I am just looking into this as well...
 

SCP1

Jetboaters Admiral
Messages
1,337
Reaction score
907
Points
252
Location
DeForest, WI
Boat Make
Yamaha
Year
2021
Boat Model
212S
Boat Length
21
I had to remove my wakeboard rack because of my tower modification on my 2017 AR190

Does anyone out there that has done the tower modification have a photo or a video of a swivel wakeboard rack that stays on the tower when folded below the windshield?

Or, do the swivel racks mount to the smaller 1 7/8 inch rear tube?
When I had a 7’ door I had to remove it each time, however you only have to remove one bolt with the Yamaha rack.
 

jgpncll

Jet Boat Lover
Messages
53
Reaction score
12
Points
82
Location
Raleigh NC
Boat Make
Yamaha
Year
2017
Boat Model
AR
Boat Length
19
Was your rack mounted to the front larger tube or the rear smaller tube?
 

SCP1

Jetboaters Admiral
Messages
1,337
Reaction score
907
Points
252
Location
DeForest, WI
Boat Make
Yamaha
Year
2021
Boat Model
212S
Boat Length
21
I have it mounted to the rear tube.
 

Betik

Jetboaters Admiral
Messages
3,723
Reaction score
4,432
Points
352
Location
Frisco, TX
Boat Make
Yamaha
Year
2012
Boat Model
SX
Boat Length
24
Have you considered raising the garage door ?
 

jgpncll

Jet Boat Lover
Messages
53
Reaction score
12
Points
82
Location
Raleigh NC
Boat Make
Yamaha
Year
2017
Boat Model
AR
Boat Length
19
Have you considered raising the garage door ?
No, just spent $9k on converting from two 8 foot wide garage doors to one single 17 foot wide garage door. Couldn't go higher with the door because of a support beam in the middle of the garage for a large room upstairs.

I want to move, my wife doesn't. So, I had the garage modified to fit the boat. Our compromise.
 

Betik

Jetboaters Admiral
Messages
3,723
Reaction score
4,432
Points
352
Location
Frisco, TX
Boat Make
Yamaha
Year
2012
Boat Model
SX
Boat Length
24
Another option is to use a caster when the tongue is folded. That will give you at least 4 inches. To put things in perspective I could not clear a 7 foot garage by 2 inches when I used a caster wheel. My boat is 7feet and 10 inches on the shore lander trailer

@swatski dont yours swingle inside ? I know your tower does not fold, but it seemed that the your racks swingle quite a bit.
 
Top