Slant detection switch code

[Acard7]

Needing some help locating the Slant detection switch, I have a 47 code flashing and confirmed with YDS. It doesn’t affect the way the boat runs but when I try to look up the part on YSPlaza I can’t find it, or overlooking it… Is it part of the thermoswitch?.. The check engine light flashing is annoying!

 

[Acard7]

No one?? ? this engine code is the only thing keeping my starboard engine from going into no wake mode

 

[RightStuff]

I don't have much info, but found this post that shows where it is on a jet ski. Could be a similar location on a boat?
2013 VX Sport, something draining new battery? - Page 3

I had no idea that a switch/sensor like this even existed. This post also shows how someone "fixed" their issue with the detector.
Inside a Slant Detector

 

[Babin Farms]

@84rzv500r
@WREKS
Either of you have an idea on this??

 

[Acard7]

I don't have much info, but found this post that shows where it is on a jet ski. Could be a similar location on a boat?
2013 VX Sport, something draining new battery? - Page 3

I had no idea that a switch/sensor like this even existed. This post also shows how someone "fixed" their issue with the detector.
Inside a Slant Detector

Thank you, I will look around for something that looks similar to that!

 

[84rzv500r]

@84rzv500r
@WREKS
Either of you have an idea on this??

slant detection switch is in the electronics box with the ECU and relays,,,

 

[Beachbummer]

 

[Acard7]

Thank you everyone, I was afraid it was inside the ECU ?

 

[Babin Farms]

Thank you everyone, I was afraid it was inside the ECU ?

Why?? Do we have issues with ECU's??? ?

You have fun taking the electrical box off that back wall of the engine bay. It's a real treat if you've never done it before.
If you need some guidance feel free to PM me.

 

[Acard7]

Why?? Do we have issues with ECU's??? ?

You have fun taking the electrical box off that back wall of the engine bay. It's a real treat if you've never done it before.
If you need some guidance feel free to PM me.

Well thank god my engine is still running alright ?? I will definitely hit you up when I go to do it, definitely will be an off season project. I’ve got things to do like the scupper so I have to get under the clean out tray eventually again!

 

[84rzv500r]

Why?? Do we have issues with ECU's??? ?

You have fun taking the electrical box off that back wall of the engine bay. It's a real treat if you've never done it before.
If you need some guidance feel free to PM me.

not in my boat... LOL you can actually set down while you do it

 

[84rzv500r]

I actually thought about beer holders in the engine bay however I haven't needed them since the repower