-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
tower light lens
- Thread starter marcham
- Start date
Robconn
Jetboaters Commander
- Messages
- 622
- Reaction score
- 758
- Points
- 197
- Location
- Lake Lanier, GA
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR192
- Boat Length
- 19
I am interested as well, mine is intact but missing tab on one side so sits higher on one side. I used black duct tape in order to keep moisture out. Been this way for 3 years. It’s functional, but for how long? So looking for a cheaper replacement.
Last edited:
ShesCrafty
Jetboaters Commander
- Messages
- 146
- Reaction score
- 239
- Points
- 182
- Location
- Webster Groves, Missouri
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- 242 Limited S E-Series
- Boat Length
- 24
Yamaha makes me crazy with these cut-rate, terrible quality parts. I mean, I love my Yamaha, past and present... but seriously. An all round light is a must, and it MUST work when you need it.
I replaced the lens for mine via Overtons.com. Mine is the ‘new style’ Attwood (flip-up)... but you may be able to find yours there, too.
(I’m not even going to bring up the shit-quality adhesive they use for the sound-proofing.)
I replaced the lens for mine via Overtons.com. Mine is the ‘new style’ Attwood (flip-up)... but you may be able to find yours there, too.
(I’m not even going to bring up the shit-quality adhesive they use for the sound-proofing.)
mjs5128
Jet Boat Addict
- Messages
- 61
- Reaction score
- 209
- Points
- 117
- Location
- Hatfield, Pa
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- 195S
- Boat Length
- 19
Exact replacement. I hit a low hanging branch on the way to the lake a few weeks back. Sure as hell wasn't going to pay $240 for the assembly. It wasn't until I found name of the company on a broken piece of plastic that was still on boat that lead me to company that supplies Yamaha.
Note: I found this after I already ordered a replacement. So I can't confirm what is included when you order the light. But the website offers a part number that you can google to replace it.
tecniqinc.com
Note: I found this after I already ordered a replacement. So I can't confirm what is included when you order the light. But the website offers a part number that you can google to replace it.
TecNiq | M10
Unique twist lock-installation and all-around light design will provide years of boating safety without taking away from your boat's stylish look. Our M10 meets ABYC A-16 and USCG 2NM standards, is constructed with proprietary TecSeal and excellent UV resistant material, and is backed by our...
tecniqinc.com
hapyfishrmn
Jet Boat Addict
- Messages
- 128
- Reaction score
- 72
- Points
- 97
- Location
- Springfield, Illinois
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- AR
- Boat Length
- 19
I have installed the M10 light and it does fit.
View media item 6441
View media item 6440
View media item 6438
View media item 6441
View media item 6440
View media item 6438
DetroiTodd
Active Member
- Messages
- 4
- Reaction score
- 1
- Points
- 40
- Location
- Detroit, MI
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- 212X
- Boat Length
- 21
FYI…
Just discovered mine was broken, not sure how it happened. The previous links no longer worked for me but I found the part on Amazon, searching by name “tecniq m10”, for $22. 2 week wait for delivery so we’ll see, but at least one comment did mention a perfect match to their Yamaha.
Just discovered mine was broken, not sure how it happened. The previous links no longer worked for me but I found the part on Amazon, searching by name “tecniq m10”, for $22. 2 week wait for delivery so we’ll see, but at least one comment did mention a perfect match to their Yamaha.
Thekillman
Active Member
- Messages
- 4
- Reaction score
- 2
- Points
- 40
- Location
- Maryland (Eastern Shore)
- Boat Make
- Yamaha
- Year
- 2018
- Boat Model
- AR
- Boat Length
- 21
I recently found that my light was broken as well. Probably a low branch on the way to the ramp. The TecNiq M10 was the exact fit. I replaced it yesterday and did some measurements and designed a clip-on shield for transport. Amazingly, first print was a perfect snug fit. I am uploading the STL file in case one of you also plays with 3D printers. The shield was printed with PLA and 25% infill. Snap it on before transport and snap it off before you launch.
