• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

What Tools Needed to Maintain Rotax 155hp on 2012 Sea-Doo Challenger

hilgert

Member
Messages
3
Reaction score
1
Points
10
Boat Make
SeaDoo
Year
2012
Boat Model
Challenger
Boat Length
21
About to pull the trigger on a 2012 Sea-Doo Challenger twin 155hp.

What tools would I need to work on the engine and/or impeller? For example, to pull the impeller for cleaning or wear ring replacement, engine maintenance (plugs, etc.), and so on?

I have heard tools needed are all metric, and to have plenty of 10mm sockets and wrenches (I guess for "in-water" work). Is there a list of sizes and types (sockets and wrenches) that I would want to have on hand?
 
Back
Top