-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
will running with flush cap off overheat engine?
- Thread starter robertr
- Start date
- Tagged users None
- Messages
- 5,807
- Reaction score
- 6,396
- Points
- 482
- Location
- Corinth, TX (DFW)
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 23
here's a good picture of it on the top rear of the engine (possibly under the air cleaner, not sure where it is on your model),
tdonoughue
Jetboaters Admiral
- Messages
- 4,883
- Reaction score
- 4,017
- Points
- 402
- Location
- The Woodlands, TX 77381
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- AR
- Boat Length
- 24
Though I would first clear it and see if it recurs. Can't hurt anything. In case it was intermittent. It shows the cam sensor nearly an hour before the overheat...
robertr
Jet Boat Lover
- Messages
- 74
- Reaction score
- 49
- Points
- 77
- Location
- Miami, FL
- Boat Make
- Yamaha
- Year
- 2003
- Boat Model
- SR
- Boat Length
- 23
Check all the wiring and everything looks okay
Gonna clear it and see what it does
Thanks everyone
I can always swap from the other engine and see if it’s actually that
Gonna clear it and see what it does
Thanks everyone
I can always swap from the other engine and see if it’s actually that
