• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

***WARNING*** 2015-18 YAMAHA “AR” BOAT OWNERS WITH FORWARD SWEPT WAKEBOARD TOWERS

Chip F.

Jetboaters Commander
Messages
248
Reaction score
222
Points
177
Location
Schuylkill Haven, PA
Boat Make
Yamaha
Year
2016
Boat Model
SX
Boat Length
24
All it would have taken was someone stepping up and doing the right thing and cover it under warranty. Now they add insult to injury and that's were all the fun begins!
 

skrip345

Jetboaters Commander
Messages
255
Reaction score
329
Points
182
Location
Sedalia, MO
Boat Make
Yamaha
Year
2016
Boat Model
Limited S
Boat Length
24
Its GOT to be an oversight by Yamaha. They tested it for loads behind the boat, not forward. Cross threads or not (though I seriously doubt that's the issue here, @swatski doesn't strike me as the kind of guy to feel a cross thread starting and keep blasting away) this should not be possible. Additionally, he went WAY out of the way to bring the tower and pieces home. For Yamaha to give him the middle finger and refuse any level of ownership here is a slap in the face. At least fix his boat and make an effort to make him whole.

I don't know about you guys, but the Bimini trip is a dream trip, that WILL be happening for me in the future. It has a LARGE part in why I purchased a Yamaha. If its proven to your customers that their BEST selling 24' boats are unsafe in this manner, and shrug a guy off that has surely sold some boats for you, you're asking for bad press. That's what this thread is...
 

Betik

Jetboaters Admiral
Messages
3,723
Reaction score
4,432
Points
352
Location
Frisco, TX
Boat Make
Yamaha
Year
2012
Boat Model
SX
Boat Length
24
I am sitting on this conference call and it is almost identical to one we had last week. And then it hit me.
Wasn't Yamaha saying that operators were not locking the plugs correctly?
 

4wheeldeal

Jet Boat Addict
Messages
185
Reaction score
52
Points
97
Location
Kingston Ontario
Boat Make
Yamaha
Year
2016
Boat Model
AR192
Boat Length
19
Same here. I've only lowered ours a few times. But I cringe when putting it back up. That starboard side is so damn hard to thread in, I'm afraid it will strip just trying to get the knob threads started.
Dido, Yamaha doesn't care which kinda pisses me off.
 

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,326
Reaction score
13,421
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
@Williamsone46, correct me if I am wrong but I believe the mount is aluminum. If so the female aluminum threads stripped out of the mount. Aluminum is a good material for light weight rigid structures, it is not a good material for threads. My guess is that the same hull flex (deflection) that allows for the center windshield section to lodge or break also causes stress on the tower mounts and specifically on those threads.

I saw his boat and know Dr. Swat well enough to know that his boat was perfect, in better condition than when she left the factory, before departing for Bimini.

So far #Yamaha is missing an opportunity to build customer loyalty and turning it into a customer relations and sales nightmare.
 

swatski

Jetboaters Fleet Admiral 1*
Messages
12,806
Reaction score
18,566
Points
822
Location
North Caldwell, NJ
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
Why isn't this on everyone's pre-check list prior to operating? Sorry but I'm not so quick to jump on the Yamaha's at fault band wagon. This could have easily been cross threaded with minimal effort or loose and in the conditions you mentioned it was operated in, it's likely that could have caused this failure.
Thanks, this is a very good point.

Believe me, I have made a significant effort to be "quick to listen, slow to speak" on the subject of assigning responsibility, at least initially and up to a point. And if Yamaha simply told me: "dude, you should not have been there, doing that, these boats are not built for that" etc. - I would totally have taken a very soft tack. We were out there in very rough weather, and that was a huge factor.

But instead, what Yamaha is telling me is: "the bolt has been cross threaded"...

Seriously???? Then, let me ask you this: who did it? Me? Dealer? Factory? People who tried to help right my tower up after it collapsed?

Also, I could find NO warnings (zero) about dangers of cross threading those AR tower bolts in Yamaha manual(s). Where are the warnings of cross thread danger? How am I supposed to know?Would you know if your tower lock bolts are cross threaded, or not? How do you tell?


Besides, this is NOT about money, for me. I am very fortunate to be in a position that I own this boat out right and I can ditch it and move on - I am so much more interested in having a fun family recreational product I can use and abuse. I did not however pay my money to deal with this nonsense, when I could afford any boat in Yamaha lineup.

In fact I have offered money to Yamaha and offered to pay them to upgrade my tower:
during one of the first conversations with them, while I was still in Bimini, I said: "get me an X-like tower, I will pay the difference". I even offered to trade in my boat and pay the difference to get into a model with an X-like tower if the AR can not be retrofitted. Guess what? - they said no.

And that is what I don't understand.

Right now, I just feel kind surprised and not sure if they are really so stupid. But I don't really care. I do not report to Yamaha, I report to my wife and my children. And they will not sit under that tower.

--
 

swatski

Jetboaters Fleet Admiral 1*
Messages
12,806
Reaction score
18,566
Points
822
Location
North Caldwell, NJ
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
@swatski What did port side of the tower do? Did it also pull the threads out?
Yes, at least as judged by presence of debris on both sides of the stern/upholstery/swim platform. The strbd side might have given out first, I think. But it was a sudden event, the collapse.

I believe Yamaha rep cited "a bolt" cross threaded, not "bolts", but that is where I would like to see a copy of their report.

--
 

Neutron

Jetboaters Admiral
Messages
3,267
Reaction score
5,433
Points
367
Location
New Bern, NC
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
@swatski , you are handling it way better than me. regardless of how, when, if, the threads were cross-threaded Yamaha should not be using a system that could be so easily Crossthreaded on something as dangerous as a falling tower. Even if that is in fact the reason why the tower fell. This whole situation really sucks
 

jsimanskey

Jet Boat Addict
Messages
24
Reaction score
22
Points
92
Location
Chicago, IL
Boat Make
Yamaha
Year
2017
Boat Model
AR
Boat Length
19
@swatski , you are handling it way better than me. regardless of how, when, if, the threads were cross-threaded Yamaha should not be using a system that could be so easily Crossthreaded on something as dangerous as a falling tower. Even if that is in fact the reason why the tower fell. This whole situation really sucks
I agree this seems dangerous. They do know there will be load imposed opposite of the towing stresses - anyone who deploys a bimini top will be stressing the connections forward in the right conditions (though the fabric should hopefully give way first). I had a pretty thorough delivery recently and was not warned of the dangers of cross threading, though I suppose now I won't be able to rightfully claim ignorance. I don't really need to collapse my tower so I don't see a lot of wear imposed by me, but I am leaning towards supplementing with some sort of pin or bolt. Or finding a way to reinforce below the aluminum base with a stronger washer/nut from below somehow - I don't know how feasible that is but won't have the opportunity to look closely until I get up to my cabin in another week unfortunately.
 

jcyamaharider

Event Sponsor
Event Sponsor
Vendor
Messages
5,427
Reaction score
5,079
Points
457
Location
Rosebud, Mo
Boat Make
Yamaha
Year
2017
Boat Model
242X E-Series
Boat Length
24
So working in manufacturing it is told to management that you need to make something to where I monkey could do it. If there is a point of failure even possible the design needs looked at. I understand that even accidents happen but choosing a threaded connection to hold the tower down is simply not a good option. Not looking at Yamaha because I know they do not design the towers. You are introducing something that wears every time the connection is made or loosened. The threaded connection is fine as long as there is a supplement lock to ensure a back up incase of a failure. Even my wake board rack has a back up option. If the handle unscrews it is still help in by a pin as to not loose it in the water.
 

4wheeldeal

Jet Boat Addict
Messages
185
Reaction score
52
Points
97
Location
Kingston Ontario
Boat Make
Yamaha
Year
2016
Boat Model
AR192
Boat Length
19
@swatski , you are handling it way better than me. regardless of how, when, if, the threads were cross-threaded Yamaha should not be using a system that could be so easily Crossthreaded on something as dangerous as a falling tower. Even if that is in fact the reason why the tower fell. This whole situation really sucks

Just have a locking bolt as well done no issues. Mine was cross-threaded when I first lowered it took me half an hour to put it back together. It was one of the issues that I took it back for warranty on.
 

adrianp89

Jetboaters Admiral
Messages
5,252
Reaction score
4,286
Points
382
Location
Tampa Bay, FL
Boat Make
Yamaha
Year
2021
Boat Model
252SE
Boat Length
25
Are there Yamaha reps on this forum? I know on the Dodge/Ram forums they have manufacture reps that chime in to help with issues.
 

jcyamaharider

Event Sponsor
Event Sponsor
Vendor
Messages
5,427
Reaction score
5,079
Points
457
Location
Rosebud, Mo
Boat Make
Yamaha
Year
2017
Boat Model
242X E-Series
Boat Length
24
I bet there is in the back ground. Yamaha you need to step up and do the right thing here. I bet we ( jetboaters.net members ) sell your boats more then you do. Just last week at the gathering @Julian and myself, along with some others, Were having a good conversation with a guy that seen us all pull up. We were the group to be with and everyone had questions. ( Sorry about that flag again Julian..... :( ) Having good customer satisfaction and a good product is key.
 

Betik

Jetboaters Admiral
Messages
3,723
Reaction score
4,432
Points
352
Location
Frisco, TX
Boat Make
Yamaha
Year
2012
Boat Model
SX
Boat Length
24
@Williamsone46 please forgive my fury. I hate bickering and especially internet bickering.
Swatski might be at the ACCEPTANCE stage, but I am still at the ANGER stage of grief and you obviously are still on the DENIAL Stage. I cannot blame you, deep inside of me I pray this was all Swatski's fault, so my kids will be safe on our future AR.

I am glad to see you are analyzing my sentence structure and implication that posts do no equal warranty. For better of worse, I build profitability & risk scorecards for living. And yes the long term impact a 4000 post man can have on profitability is more than $2,000 worth of tower. My suggestion was based on expected losses. Didn't you see the guy from Chicago wondering if he should return his 2 weeks old boat ?

Please understand that my frustration is not directed towards you, but rather Yamaha. Unfortunately you are the closest person to a yamaha rep at this moment. Although, I am 100% you sure are just trying to be rational about it.
 

Ancient canoe

Jet Boat Junkie
Messages
491
Reaction score
384
Points
147
Location
Denton TX
Boat Make
Yamaha
Year
2019
Boat Model
AR
Boat Length
21
I am sitting on this conference call and it is almost identical to one we had last week. And then it hit me.
Wasn't Yamaha saying that operators were not locking the plugs correctly?
This seems very similar to the plug blowout posts and as far as I can read Yamaha never did anything about that as well, other than redesign years later. Granted there is only one instance of tower collapse here, and horrible conditions which 99% will never be in played a role. The fact that the other towers have secondary locking pins just goes to show you two bolts are not enough. I mean would Yamaha recommend an LS or X owner disengage their pins and cruise around? Are the LS/X towers heavier than the AR that they require secondary pins?
 

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,326
Reaction score
13,421
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
very similar to the plug blowout
A plug blowout could swamp your boat and destroy your engines but is unlikely to break your back or neck.,

horrible conditions which 99% will never be in
It was rough but not that rough. I have often crossed larger wakes on a lake than the waves we were in.
 

Ancient canoe

Jet Boat Junkie
Messages
491
Reaction score
384
Points
147
Location
Denton TX
Boat Make
Yamaha
Year
2019
Boat Model
AR
Boat Length
21
I mean Yamaha's response to an obvious design flaw is similar not the results are similar. Clearly a collapsing tower is a more serious issue as the physical injury potential is scary.
 

Betik

Jetboaters Admiral
Messages
3,723
Reaction score
4,432
Points
352
Location
Frisco, TX
Boat Make
Yamaha
Year
2012
Boat Model
SX
Boat Length
24
Clearly a collapsing tower is a more serious issue as the physical injury potential is scary.
I know right, had swatski been half an inch backwards, we could been attending a funeral these days. That rear part of our head is not meant to take such blows, defiantly not in the middle of a storm and 25 miles from the closest ER.
 

Slfmde

Jet Boat Addict
Messages
110
Reaction score
67
Points
97
Boat Make
Yamaha
Year
2017
Boat Model
AR
Boat Length
24
I'm assuming 18's have the same design? Just talked to dealer today and was considering putting down a deposit. Guess I will wait, I have two small kids can't risk it.
 

mraz72

Jet Boat Junkie
Messages
823
Reaction score
310
Points
147
Location
Rochester, NY
Boat Make
Yamaha
Year
2016
Boat Model
242X E-Series
Boat Length
24
If there is a positive here, it could have been worse, luckily there wasn't an injury serious enough to kill someone. I can imagine your family was traumatized by that incident, I'm sorry you guys had to deal with that.

I wouldn't expect bouncing on waves to bring down the tower, regardless of how rough it is. I would hope Yamaha's testing was much more rigorous than that but who knows.

Did you feel the waves were dangerous? Were you nervous about just "making it" (not about the tower coming down). I can imaging my daughter telling me I'm an idiot for going out in rough weather lol
 
Top