• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Simrad Go12 in a 210 FSH

Skroggy66

Jet Boat Addict
Messages
115
Reaction score
93
Points
117
Location
Flagler Beach FL
Boat Make
Yamaha
Year
2019
Boat Model
FSH Sport
Boat Length
21
Purchased a 2019 210 FSH and wanting to put a 12" in the console, any one done this? Looks like it will fit.
 

Dixie Highway

Jetboaters Commander
Messages
1,413
Reaction score
1,478
Points
192
Location
Daphne, AL
Boat Make
Boatless
Year
NA
Boat Model
Other
Boat Length
NA
I have heard a 9” screen is the biggest you can flush mount, but don’t have my boat yet.
 

Dixie Highway

Jetboaters Commander
Messages
1,413
Reaction score
1,478
Points
192
Location
Daphne, AL
Boat Make
Boatless
Year
NA
Boat Model
Other
Boat Length
NA
I suppose some careful measuring is in order, I have never seen a 12” MFD flush mounted in a 210 FSH console.
 

Kaizen

Active Member
Messages
6
Reaction score
6
Points
32
Boat Make
Yamaha
Year
2018
Boat Model
Other
Boat Length
19
I installed my Simrad Go9 and it included the template for the 12inch. I mocked it up and it would be a very tight fit, but can be done very carefully.
 

Skroggy66

Jet Boat Addict
Messages
115
Reaction score
93
Points
117
Location
Flagler Beach FL
Boat Make
Yamaha
Year
2019
Boat Model
FSH Sport
Boat Length
21
I installed my Simrad Go9 and it included the template for the 12inch. I mocked it up and it would be a very tight fit, but can be done very carefully.
That is what I wanted to hear... I will order that bad boy now so I have it when my boat comes in..
 

Grassman

Jet Boat Addict
Messages
89
Reaction score
66
Points
97
Location
Foley, AL
Boat Make
Yamaha
Year
2018
Boat Model
FSH Sport
Boat Length
21
You can download the template online and check before purchase if needed.
 

Skroggy66

Jet Boat Addict
Messages
115
Reaction score
93
Points
117
Location
Flagler Beach FL
Boat Make
Yamaha
Year
2019
Boat Model
FSH Sport
Boat Length
21
I ordered the Simrad GO12 XSE I guess if it doesn't fit I will surface mount it to the top of the console. My eyes are not getting any better.
 

Bubblehead

Jet Boat Lover
Messages
70
Reaction score
35
Points
67
Location
Kingsland, GA
Boat Make
Yamaha
Year
2018
Boat Model
FSH Sport
Boat Length
21
I have the go9 flush mounted and wish it were bigger and surface mounted. Would be less glare, closer to eye level, therefore easier to see. Would also be nice to flip and see from the bow. Truth be told, I want both and plan to add go12.
 

Skroggy66

Jet Boat Addict
Messages
115
Reaction score
93
Points
117
Location
Flagler Beach FL
Boat Make
Yamaha
Year
2019
Boat Model
FSH Sport
Boat Length
21
My only fear of the top of the console is I am short and don't want to have any obstructions. I will certainly consider it before I cut the console. And I agree it would be nicer to swivel it. I will take pictures with what I come up with.
 

Maillis

Jet Boat Addict
Messages
87
Reaction score
66
Points
87
Location
Holiday, FL
Boat Make
Yamaha
Year
2018
Boat Model
FSH Deluxe
Boat Length
21
I had a Garmin 1042xsv installed. It’s slightly wider than the Simrad GO12 XSE due to the button controls, but the Garmin is over an inch shorter. As you can see, there is a little space left underneath mine (you can’t go any higher up on the console since there is a lip at the top), but I’m not sure it’s enough space for the Simrad. If it is, it’ll be very close.
91482
 

YamahaKub

Jet Boat Lover
Messages
67
Reaction score
57
Points
77
Boat Make
Yamaha
Year
2018
Boat Model
FSH Deluxe
Boat Length
21
I have the go9 flush mounted and wish it were bigger and surface mounted. Would be less glare, closer to eye level, therefore easier to see. Would also be nice to flip and see from the bow. Truth be told, I want both and plan to add go12.
This is what I did. Works great. And I can tilt it down, so if I am fishing off the back or just lounging around anywhere on the boat, I can see the screen. I have a 12inch Solix. I have never had it get in my way of seeing the water. With the right surface mount, you can bring it down and towards you to even lower it more. The ability to point the screen right at your face, makes up for the extra clutter look with it being surface mounted. From a function standpoint, it works very well. Especially of you use it while moving around in the boat. I have a bow mount unit also, buy rarely use it.
 

Skroggy66

Jet Boat Addict
Messages
115
Reaction score
93
Points
117
Location
Flagler Beach FL
Boat Make
Yamaha
Year
2019
Boat Model
FSH Sport
Boat Length
21
This is what I did. Works great. And I can tilt it down, so if I am fishing off the back or just lounging around anywhere on the boat, I can see the screen. I have a 12inch Solix. I have never had it get in my way of seeing the water. With the right surface mount, you can bring it down and towards you to even lower it more. The ability to point the screen right at your face, makes up for the extra clutter look with it being surface mounted. From a function standpoint, it works very well. Especially of you use it while moving around in the boat. I have a bow mount unit also, buy rarely use it.
Do you have pictures? I am just worried that it will obstruct my view.
 

YamahaKub

Jet Boat Lover
Messages
67
Reaction score
57
Points
77
Boat Make
Yamaha
Year
2018
Boat Model
FSH Deluxe
Boat Length
21
91586
Old picture from install. This is pretty much at full height. Can drop it down so the lower edge of the screen is below the top edge of the console.
 

Dixie Highway

Jetboaters Commander
Messages
1,413
Reaction score
1,478
Points
192
Location
Daphne, AL
Boat Make
Boatless
Year
NA
Boat Model
Other
Boat Length
NA
Love it, tight fit would be an understatement.
 

RMTZ

Active Member
Messages
8
Reaction score
2
Points
42
Boat Make
Yamaha
Year
2020
Boat Model
FSH
Boat Length
21
G012 installed, was a tight fit.
Looks like it fits perfect! Looks great. Any issues? Im planning on getting one. Do you have more pictures? Thanks
 
Top