• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

gauge

  1. topherbd16

    Gauge removal help

    I’m swapping one of the RPM gauges for a Hydrophase Ridesteady gauge on my ‘18 212x. Problem I’m running into is unthreading the all white gauge. The panel came out super easy. Lefty loosey with an oil filter tool and a ton of force (feels like I’m close to breaking the dash so I’m pretty...
  2. J

    2013 Yamaha 242 Limited Gauge Question

    Hey All, Picked up a used 2013 242 Limited. All Gauges seem to only power up after the engines are started. They stay on when running, then turn off maybe 15 seconds after shutting down. The thing is this seems like they are wired wrong to me. It would seem more logical to me to allow the...
  3. bigdaddyslim66

    SX210 '06 RPM Gauge

    I was on my Sea Trial yesterday and the portside RPM gauge was not working. This was the first time in the water since the Compression Test, which was stellar. Only 100 hours on this boat, was garage kept. Anyway, someone on Facebook said to check where the computer read table is, as it may...
  4. Scottie

    How to install temperature gauges and senders for engine temps

    I wanted a way to monitor the temperature of each engine on my boat (2013 212x, 1.8l HO engines). In stock form, you will get an overheat warning in the multi-function display (tach) when there is a problem, but you will get no warning before that, and you will get no actual temperature reading...
  5. Denis ‘ATAdventure’

    HELP! Gauges will only come ON after engines start! And not when keys are in ON position!

    Hi, I’ve got a problem on my 2012 242 LTS where i turn the keys to ON and nothing happens! But if I continue turning to start, then after the engines start the gauges come on! And only the right engine powers on the speedometer (Middle one) along with tachometer after start. Fuses ok, no...
  6. suke

    Installing Faria GPS Speedometer in 2009 212x

    So after searching for a few days and pouring over the wiring diagrams in the FSM I determined nothing was really going to help me much. I wanted to leverage the stock speedo wires as much as possible. In the directions it mentions a black, purple, and blue wire. Wouldn't ya know that's exactly...
Top