• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

install

  1. Y

    Seadek staining from Georgia red clay?

    We boat exclusively in North Georgia and I'm thinking of getting the Seadek kit for our 2015 AR210. The issue I'm concerned about is the kids climbing into the boat with clay/muddy feet or throwing shoes onto the boat with red clay on them (if you have been in a Georgia lake, you know what I'm...
  2. MidnightRider

    Installing/aligning Hydrohoist for 212x

    Anyone out there have a 212x or alternatively any 21' Yamaha on a hydrohoist? We are having a used Hydrohoist 6600lb lift delivered next week and I'm wondering if I can shortcut the trial and error as far as lining it up on our dock. The installation instructions say to line up the back of the...
  3. J

    One Ridesteady install tip

    In the hopes of saving another mechanically challenged person (like me) from cursing at the APS while trying to get the cable off... I finally figured out that I could jam a flathead screwdriver behind the connector to release the latch. I still had a hard time gripping the cable, so I also used...
  4. shar

    Thrust Vector X Install

    This past weekend I installed JBP's Thrust Vector X system on my 2019 AR240. Low speed maneuvering was improved 1000% (scientific calculation). For the first time in my short time of ownership, I felt confident in docking and loading the boat. However, I noticed while at speed there was a...
    • shar
    • Thread
    • 2019 ar240 ar240 heavy steering install jbp thrust vector x
    • Replies: 8
    • Forum: General Discussion
  5. Julian

    FAQ-Mods&Upgrades This is a Test ---- How to add a fridge to your boat

    This is a test FAQ mod would go here
  6. Wetjet57

    Amp Location/pictures

    Looking for pictures and suggestions of where everyone has mounted there amps. I am going to be installing two Wet sounds HTX-4 Amps, 4 REVO 6 speakers and two rev 8 tour speakers on my Ar210. Planning on running 0 gauge power and ground to a distribution block under the helm and mounting both...
  7. Luc Lafreniere

    Where to install in hull transducer on Scarab 165?

    Hi, just purchased a 2015 Scarab 165, 150HP with 22hrs on it. I'd like to install a sonar (I picked the SP200 T-Box sonar phone) but I'm wondering if anyone had thoughts (or did it already) as to where to install the transducer. I really want to do an in hull installation as opposed to the...
Back
Top