2007 SX230HO How to replace oil pressure sensors

[ChrissoSX230HO]

Hi all,
Can anyone please point me in the right direction, I’m trying to replace the oil pressure sensors on both the port and starboard engines on my 2007 sx230HO. Are there any threads or videos?
Thanks in advance, cheers Chrisso

 

[zipper]

This is the location. Part #18. 2007 Yamaha SX230 HO (BLUE) (SXT1100AF) Electrical 2 | Yamaha Sports Plaza

 

[ChrissoSX230HO]

This is the location. Part #18. 2007 Yamaha SX230 HO (BLUE) (SXT1100AF) Electrical 2 | Yamaha Sports Plaza

View attachment 220270

Hi Zipper,
Thanks for getting back to me.
I've been using the diagram you attached to try and locate the oil pressure sensor on the side of the engine block. The area is quite congested with wiring looms and the exhaust manifold so it's difficult to find. Do you know if there is any other information, posts, videos, threads etc from others that have replaced the oil sensors?
Cheers, Chris

 

[WREKS]

paste link in browser: https://jetboaters.net/attachments/2007-ar230-sx230-ho-lit-18616-03-01-pdf.219978/
part 6 chapter 5-81; part12 chapter 7-25

 

[zipper]

Hi Zipper,
Thanks for getting back to me.
I've been using the diagram you attached to try and locate the oil pressure sensor on the side of the engine block. The area is quite congested with wiring looms and the exhaust manifold so it's difficult to find. Do you know if there is any other information, posts, videos, threads etc from others that have replaced the oil sensors?
Cheers, Chris

I do not know of a video for this. @WREKS
posted a link to the service manual. Here is a screenshot from mine. Chapter 5-81.

 

[Brad_Ct]

Hi Zipper,
Thanks for getting back to me.
I've been using the diagram you attached to try and locate the oil pressure sensor on the side of the engine block. The area is quite congested with wiring looms and the exhaust manifold so it's difficult to find. Do you know if there is any other information, posts, videos, threads etc from others that have replaced the oil sensors?
Cheers, Chris

It is going to be nearly impossible to get to them unless you remove the entire air box.