• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2008 SX 210 speedometer not working

2008sx210guy

Active Member
Messages
7
Reaction score
0
Points
40
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
21
hi everyone. My last outing of the season last year the speedometer wouldn’t move. I am new to the boat and was told there might be a wheel that spins or maybe water that goes into a hose. Can anyone tell me what to look for andHow to fix it
 

Babin Farms

Jetboaters Admiral
Messages
3,598
Reaction score
11,730
Points
477
Location
Lower Alabama
Boat Make
Yamaha
Year
2009
Boat Model
AR
Boat Length
23
Was it working before?
I believe there should be a paddle wheel on the back of your boat. Make sure it spins free. If that doesn't do it and you've checked everything else I would go with a GPS speedometer either in a chart plotter or something like this Faria Chesepeake Black Ss 4
 

ripler

Jetboaters Captain
Messages
923
Reaction score
1,354
Points
227
Location
Just south of Pittsburgh
Boat Make
MasterCraft
Year
2021
Boat Model
Other
Boat Length
20
Your boat will have a pilot tube on the rear that works off of water pressure, it may be clogged or damaged. There is a small tube that goes from the pilot to to the speedo, you can check to see if it's still attached.

It looks like this.


Screenshot_20210105-085003_Amazon Shopping.jpg
 

Street glide

Jet Boat Addict
Messages
122
Reaction score
73
Points
87
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
21
The one on my old boat got clogged one time cleaned it out and it worked fine
 

2008sx210guy

Active Member
Messages
7
Reaction score
0
Points
40
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
21
Thank you yes I do have that pilot tube plastic piece on the back. I will take a look at it. How did you go about unclogging the tube, did you blow compressed air into it or something of that nature
 

Cobra Jet Steering LLC

Jetboaters Admiral
Vendor
Messages
5,865
Reaction score
5,348
Points
452
Location
Florida
Boat Make
Yamaha
Year
2021
Boat Model
Other
Boat Length
Other
also look on the back of the speedometer as the tubes were notorious for falling off and soaking everything behind the dash as well
 

zipper

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
7,700
Reaction score
20,846
Points
797
Location
Northern Vermont Lake Champlain
Boat Make
Boston Whaler
Year
1995
Boat Model
Other
Boat Length
18
Removed the speedo and paddle wheel and replaced ours in 2016 with a Perfect Pass PrecisionSTAR gps speedo. Since, it has been discontinued. The unit has worked great. Highest speed was 48.8 mph. A lot of gps replacement options out there now for the Dreamometer if not repairable.

20170915_165522.jpg
 

Beachbummer

Jetboaters Admiral
Messages
3,963
Reaction score
2,880
Points
332
Location
Houston TX
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23

ripler

Jetboaters Captain
Messages
923
Reaction score
1,354
Points
227
Location
Just south of Pittsburgh
Boat Make
MasterCraft
Year
2021
Boat Model
Other
Boat Length
20
Thank you yes I do have that pilot tube plastic piece on the back. I will take a look at it. How did you go about unclogging the tube, did you blow compressed air into it or something of that nature
If there's something in the pilot tube you can try using a drill bit by hand, the clog will usually only be in the hard white plastic part.
 

2008sx210guy

Active Member
Messages
7
Reaction score
0
Points
40
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
21
If there's something in the pilot tube you can try using a drill bit by hand, the clog will usually only be in the hard white plastic part.
thank you very much
 

Billtex2000

Jetboaters Captain
Messages
913
Reaction score
1,608
Points
247
Location
Lake Wallenpaupack, PA
Boat Make
Yamaha
Year
2006
Boat Model
SX
Boat Length
21

Beachbummer

Jetboaters Admiral
Messages
3,963
Reaction score
2,880
Points
332
Location
Houston TX
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
You need to connect the power supply and light to the existing wiring, and you also need to make a knot on the water pilot tube going to the current gauge that won't be used anymore, to prevent water from coming in through there.

The gauge is self contained, so there is no external antenna. Just 3 wires if I remember correctly: Ground, Power (+) and light(+).
 
Top