2015 AR210 cushion removal photos

[DeeAmericanDream]

Good morning,

I am attempting to take out my back rest cushions up on the bow of my 2015 AR210 to tighten the rail handles on the bow. There are 3 screws hidden on the bottom of the cushion which I took out. The top is still hung up. Is there something I'm missing? Or just give it a good pull I didn't want to rush and break something

I am new to the forum and tried to look at other threads. Didn't find anything, unless I'm not navigating the site properly

Thanks

 

[Murf'n'surf]

push/pull the cushion UP -- they are sitting on clips.

 

[DeeAmericanDream]

Going to try That now! Thanks

 

[DeeAmericanDream]

So I got the cushion out thanks to Murf'n'surf. Figured there would be an access hole behind the cushion to tighten the bow rails. Which are both loose on the port and stbd side

 

[DeeAmericanDream]

Disregard! Just follow the music lol ‍

 

[TheGreekTitan]

@DeeAmericanDream

Can you post up what size socket you use to tighten them down please? I have the same issue on my '15 210. I was trying to reach up from under the seat. It was not easy. So also post up how well it worked using the speaker hole. Thanks

 

[Murf'n'surf]

Wow......poor guy had to wait 2 whole minutes to get the answer! Try that on some 'other' jetboat site......

 

[DeeAmericanDream]

@TheGreekTitan

Check back in a few. I will put together a little something.. had to go to work

 

[DeeAmericanDream]

@Murf'n'surf @TheGreekTitan

You will need a 13MM socket an a 32 waist haha access the front through the speaker and the rear through the floor storage. It also gets you access to behind the dashboard



Hope this helps!!

 

[TheGreekTitan]

Well, I've got the 13mm socket.


Thanks for the info. . It will save me from bringing the whole set.

 

[RightStuff]

View attachment 61236

I have nightmares from getting into that compartment (in that position) when I did my stereo install.

 

[djetok]

Good morning,

I am attempting to take out my back rest cushions up on the bow of my 2015 AR210 to tighten the rail handles on the bow. There are 3 screws hidden on the bottom of the cushion which I took out. The top is still hung up. Is there something I'm missing? Or just give it a good pull I didn't want to rush and break something

I am new to the forum and tried to look at other threads. Didn't find anything, unless I'm not navigating the site properly

Thanks

hmm , weird on my 2015 that I bought new there were wingnuts. I just reached through the storage compartment to the other side of the back rest and undid the wing nuts. push the cushion towards the sky and voila.

 

[DeeAmericanDream]

hmm , weird on my 2015 that I bought new there were wingnuts. I just reached through the storage compartment to the other side of the back rest and undid the wing nuts. push the cushion towards the sky and voila.

The 13MM is for the bow hand rails.

 

[djetok]

The 13MM is for the bow hand rails.

gotcha , I guess I didn't get past bow cushion back rest.

 

[usnagrad1988]

I have 4 screws left on my 2015 AR210 and I'm 6-4" 210 lbs, so I can't fit in that compartment to get the last screws out I need to hire a little guy to get in there. I like the idea of replacing the hex nuts with wing nuts if I ever have to do this again. The very back cushions had bolts in the engine compartment that were easy to access, but then I had to go through the speaker holes for a few more and I can't believe the last one is through another compartment going even further aft that seems impossible to access. Very frustrating.