• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2015 connex amplifier remote wire

Hezi

Jet Boat Addict
Messages
119
Reaction score
52
Points
107
Location
Secaucus NJ
Boat Make
Yamaha
Year
2022
Boat Model
212S
Boat Length
21
I installed 2 JL amplifiers and was hoping anyone could tell if there is a dedicated wire coming from the head unit for amp remote. I could install a switch, but if the wire exist, It'll be much better. What do all of you with upgraded audio are doing?
Thank you for your help!
 

Mike Clark

Jet Boat Junkie
Messages
173
Reaction score
135
Points
132
Location
Germantown, ohio
Boat Make
Yamaha
Year
2015
Boat Model
SX
Boat Length
24
I’m sure you have this figured out by now, but in case you haven,t the remote wire is the dark blue one in the main harness with the speaker wires. I am running two amps and basically ran two wires off this one to both remotes connects on the amps. Turns on everything when I turn on the connect screen

Gto this website, provides complete manual for Polk Audio system on our boats. Once there, go to page # 9 for wiring identification.
WWW.manualslib/manual/609375/ Polk-mono-PA450
 

Hezi

Jet Boat Addict
Messages
119
Reaction score
52
Points
107
Location
Secaucus NJ
Boat Make
Yamaha
Year
2022
Boat Model
212S
Boat Length
21
I’m sure you have this figured out by now, but in case you haven,t the remote wire is the dark blue one in the main harness with the speaker wires. I am running two amps and basically ran two wires off this one to both remotes connects on the amps. Turns on everything when I turn on the connect screen

Gto this website, provides complete manual for Polk Audio system on our boats. Once there, go to page # 9 for wiring identification.
WWW.manualslib/manual/609375/ Polk-mono-PA450
Thank you for this. I did figure it out and connected the blue to fire both of my amps. This should help other. Thanks again!
 
Top