• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

2017 Yamaha limited s connext : issue

Messages
7
Reaction score
0
Points
20
Boat Make
Yamaha
Year
2017
Boat Model
Limited S
Boat Length
21
Help please...
I replace my batteries this weekend. My boat starts up fine . The only things that don’t work is my sound system , tacs and connext screen stays on Yamaha display. Has anyone had this problem?
 
I would start by checking battery voltages and connections. A picture of the connections may help a second set of eyes spot something wrong with the connections. As long as the battery switches were shut off during the changing of the batteries, then there should not have been any way to damage any components in the system. From your description, it really sounds like the House/system side is underpowered somehow.
 
Thank you for the input... I have it at the shop now. I'm hoping to get it fixed soon and hopefully the unit isn't shot it's on backorder until August
 
Update: screen was replaced it goes now. But now the screen is popping up with errs, pcu errs, and rpm tacs are going up down. Any suggestions how to fix this?
 
Back
Top