• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

242x 242 AR240 ECU connector pic needed please. Thanks

AR240X

Member
Messages
1
Reaction score
0
Points
10
Boat Make
Yamaha
Year
2017
Boat Model
AR
Boat Length
24
Hi, really need your help..These 7 wires were ripped out of the right connector of the ecu located under the steering helm.
Can someone please take a pic to show where each goes.
Attached Pics of connector show the 7 empty slots on the connector where the wires were pulled from. Thanks

PS. This is for a 2020 242x but similar years/models may have the same wiring.

IMG_20250121_230306.jpgIMG_20250121_230318.jpgIMG_20250101_180204.jpgIMG_20250107_161601.jpg
 
Pin and color layout should be in the service manual wiring diagram. If you get a picture from here is needs to be the exact year and model. Dont take a risk like that on a may be similar, it needs to be exact
 
Back
Top