• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Clean out sensors issue. I pulled the sensors out and switched them over and still get nothing

martyober

Member
Messages
3
Reaction score
0
Points
10
Boat Make
Yamaha
Year
2006
Boat Model
SX
Boat Length
21
I have an ar210 and the clean out sensors are messed up. Before spending money I switched the sensors and it still would t fire the left motor. I cut the wires to bypass the sensors and when I put all four wires together the motors try and start but won't turn over. Any thoughts before I take to dealer?
 
Why would 1 motor fire and the other? The kill switch controls both?
 
how do they TRY TO START but not turn over do you mean they turn over but do not fire up
 
Back
Top