Cobra Jet - Exceptional Customer Service

[scottbailie]

I recently swapped my Thrust Vectors for the Cobra Magnum AK w/ Mega Fangs. During the install, despite the caution in the instructions, I managed to slightly strip the threads in one of the jet nozzles. I didn't want to risk having the bolt drop out while underway, so I reached out to Jeff at Cobra Jet. Within 5 mins on a Saturday morning he responded to my email and walked me through an alternate installation. To perform the alternate method, I needed some additional HW, which he immediately shipped at no charge. I was impressed that Jeff even threw in the required bit for the new button cap bolt. A huge thanks for Jeff for his help - it's hard to come by this type of customer support these days!

Ice out on Lake Winnipesaukee was yesterday, so I'm anxious to get the boat on the water and check these out! I'll post my first impressions and comparison to my old TVs.

 

[Cobra Jet Steering LLC]

ok you can do the upgrade and make those the super magnum ak deluxe model that will only cost $129 and not be very difficult to change, here is what it will look like when it is changed over the outer fins are bigger for more influence at slow speeds and it will have top fins that only work when the boat is off plane also adding more influence at slow speeds and it will have plaining surfaces for faster hole shot smoother ride in chop and a cleaner wake for watersports.