• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Contacted Scarab!

After I moved the hot wire to the fuse block that has the power draining black module to the switched side of the master switch I have not had any issues. I keep the battery connected and it is not drained when I head out.

Good info about waiting one minute after ignition off to turn off battery.
 
Who's your dealer in SW Florida
 
I purchased the boat in Cincinnati and took it to Wavetech Powersports in Fort Myers this spring after I created a fault and the engines would not go into gear.

Per instructions from Cinci dealer I had moved all the wires to the switched side of the master but I missed one causing the fault that would not clear (before I had CanDoo). Wavetech rewired the switch back to OEM and would not honor the warranty. They said nothing was wrong with my boat. Of course the battery was dead within a week even with the master off. I have not returned.
 
Last edited:
Do you know which wire you didn't move to the master switch & remember what fault it was causing you?
 
I took the boat in because I had a "reverse module fault". Engines would run, but boat would not shift into forward or reverse. I made sure the battery was fully charged because I read low voltage could cause that fault.
 
Last edited:
Back
Top