bigphil
Member
- Messages
- 7
- Reaction score
- 5
- Points
- 12
- Boat Make
- Yamaha
- Year
- 2024
- Boat Model
- 222SD
- Boat Length
- 22
I didn't really see any mounts that I was in love with so this is what I came up with. Printed in ASA filament...may do resin depending on the results. I haven't finished the install all the way and need to fine tune the two bolts length that mount to the ride plate. Overall quite pleased with how it turned out. I might drop it down another .25" - .5" depending on side-vu results. Won't be in the water until next Monday/Tuesday for the first test. Transducer is the Garmin GT52HW-TM. Should be very easy to adjust the dimensions for other transducers.