• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Garelick Mount Location

F

Flying I

Member
Messages
3
Reaction score
1
Points
10
Boat Make
Yamaha
Year
2018
Boat Model
242 Limited S E-Series
Boat Length
24
I have the OEM Garelick Bracket on the port side, and I'd like to add one to the starboard side (mirror image to the port side). Also considering a center location. Has anyone done this? Is there access to the interior?

Garelick Bracket Locations.png
 
I haven't, but I don't think access is your largest issue. You will need the fiberglass thick enough and reinforced. I suspect there is a plate behind the stock one...

Otherwise you risk tearing a hole in your hull when someone leans on something attached to the mount.
 
This is the kit from JEWLSCUSTOMS.COM. It has backplate but not sure if it's same as OEM. I guess I'll just see if I can get eyes on the stock one's backing plate and see if this one is equal or better.
1000022604.jpg
 
Jewls makes good accessories, you should be good. Access shouldn't be an issue. for the starboard side, remove the cup holder.
 
Sounds good. I'll order the mount and give it shot. Thanks all!
 
Yes, that looks like a good sized back plate. That is key.
 
You must log in or register to reply here.

Similar threads

D
LS2000 - Unknown Port in Hull
Replies
3
Views
87
dchale1008
D
Marvin willis
Vx flush relocation
Replies
0
Views
33
Marvin willis
Marvin willis
C
Jet Boating Ocean City, MD
2
Replies
22
Views
1K
Jeff L24
Jeff L24
K
Port engine has vibration over 3k rpms
Replies
5
Views
503
David Martin
David Martin
rwilking
Where to mount fishfinder on 222SD
Replies
0
Views
58
rwilking
rwilking
Back
Top