• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • ISLAND JAY has your Jetboaters.net Clothing, hats, stickers and more all at a 30% discount until June. Click Here for more information>SWAG for JetBoaters.net members only

    Help out a new business and show off your love of Jetboating!

    You can dismiss this notice by clicking the "X" in the upper right>>>>

Intermittent non-start and voltage alarm

H2OBoy

Jetboaters Commander
Messages
278
Reaction score
154
Points
197
Location
Lake Oconee, GA
Boat Make
Yamaha
Year
2023
Boat Model
AR
Boat Length
22
Over the weekend I experienced a couple of instances where my boat would not start and the voltage alarm would sound. After a couple of tries it would eventually start but this happened at least twice, generally after sitting no more than 15-20 min. My battery had been on the charger until the day before heading out for the weekend. Also, I took my battery to have it checked when I returned and it tests fine.

Any ideas of what may be causing this? I am fine if a new battery will solve the issue, I just don't want to go that route if it's not the problem.
 
To me it sounds like a loose or corroded battery connection.
 
I agree with Andy, remove the wires from one battery terminal at a time. Make sure all the connections are clean. Add some dielectric grease then reinstall tightly.
 
Make sure your connections are tight AND clean. If you are a salt water guy, there might be some corrosion on the terminal ends that needs to be wire brushed off.
 
No salt water and the connections appeared to be tight and clean. I suppose this could still be the issue though and sounds feasible. I will try the grease, re-install, and monitor the next time I am out. Thanks for all the help.
 
Before you had this low voltage warning were you listening to the radio for a few hours? Got Amps?
 
A few hours? No. Maybe 15 min or so. No amps, completely stock radio. :(
 
Check those connections and if all are good I would question that battery test.
 
Back
Top