We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
It's attached to the trailer on the ramp, I knew there was a leak back there somewhere, so I just wanted the transom in the water. Just happened to dip the rub rail in there a bit too.Why is boat so low in the water? Water is over the back of the boat. My boat sits at least 6 inches higher then that.
Wow! No worries, who doesn’t need an extra hole in their hull!!Here's something funny. I just pulled the center piece out of the rub rail, I haven't taken any screws out of it yet...here's a screw hole that was never filled..You can see straight through the hull.
View attachment 149217