• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Looking for ECU for 2009 212X

Alexei

Active Member
Messages
3
Reaction score
0
Points
40
Location
California
Boat Make
Yamaha
Year
2009
Boat Model
X
Boat Length
21
Hello,
The ECU on my port engine is failing making one of the injectors spray continuously. The new one is pretty expensive, does anyone have a good working used one? Or knows of place where they can be fixed? Thank you.
The part number is 6P6-8591A-01-00
 
New ones are around $1000.
The existing one can be repaired. Perhaps @bronze_10 will respond. He recently went through the process.
 
I had BOTH of mine repaired for a out 400 bucks each. I used a place called regulator rectifier. They fixed them both but I had to send one back to be fixed again.
 
I may have one I can let go of. It came out of a 2008 sx230.
 
@bronze_10 - Thank you for the response. I am thinking of using them as well. What was the reason your ECU's failed and why did they have to repair one of them twice. Thanks.

@PaulyB - how much do you want for it? How many hours? Any issues? Thanks
 
I can’t recall the hours. No issues that I know of. @bronze_10 has one of my spare ecus now and it has been working well for him. I don’t know what a good price is for it. $600?
 
I had an unfortunate I didn't with a waterfall that allowed water to get in my ecu... the repair they did on one failed. I aent it back.to then within the year warrant and they repaired it for free.
 
@bronze_10 - thanks for clarification. Seems like they are in California, and so am I. Good to hear they provide warranty and stand by their word
@PaulyB - this seems a bit too much for a used ecu. I can get mine repaired for $400, not sure if it's better to get mine repaired or get a used one. But thanks for the offer!
 
I may have one I can let go of. It came out of a 2008 sx230.
Do you still have an ecu available? 6P6-8591A-01-00? Thanks. Tom
 
Back
Top