Ronnie
Jetboaters Fleet Admiral
- Messages
- 8,775
- Reaction score
- 12,191
- Points
- 667
- Location
- SF Bay Area
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
I will and find a link to my thread on that, it may be on the other site.
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
My trailer mods
- Thread starter Ronnie
- Start date
Ronnie
Jetboaters Fleet Admiral
- Messages
- 8,775
- Reaction score
- 12,191
- Points
- 667
- Location
- SF Bay Area
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
Here you go. Brings back some painful memories and thoughts about what could have been. Good lessons as well.Oh no, you're going to have to TELL US THAT STORY. No free lunches here...
pics are on page 2
anmut
Jetboaters Admiral
- Messages
- 2,967
- Reaction score
- 2,800
- Points
- 277
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- 212S
- Boat Length
- 21
Holy damn! I've always kept my receiver in all the time, with a lock, except for in the salt months of WI.
Ronnie
Jetboaters Fleet Admiral
- Messages
- 8,775
- Reaction score
- 12,191
- Points
- 667
- Location
- SF Bay Area
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
I just replaced the axle, bearings, hubs and bearing buddies on my pwc trailer. The concept is simple enough but execution was a PITA for me. It took 2 floor jacks and stands to lift the trailer, plus 2 bottle jacks and stands to deal with the axles (and of course about 4 hours of my time).
not many pics, sorry. FYI 2 of 4 welds which connect the spindle to the main axle bar failed causing the wheel to be out of alignment and to wear/fail early.
not many pics, sorry. FYI 2 of 4 welds which connect the spindle to the main axle bar failed causing the wheel to be out of alignment and to wear/fail early.
Similar threads
