• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Need a quick measurement - Swim Platform height while on trailer - 2017 AR190

2kwik4u

Jetboaters Fleet Admiral
Messages
7,772
Reaction score
10,380
Points
577
Location
Buffalo, NY
Boat Make
Yamaha
Year
2017
Boat Model
AR
Boat Length
19
I've googled and searched and can't find an answer. Hoping someone here has relatively quick access to their boat on a trailer. Mines in storage until, what feels like, the first of forever from now.

I'm looking for the height of the "upper deck" of the swim platform from the ground on an AR190/195. Likely the same measurement on an SX190/195 as well. I'm putting a 240V outlet in the garage, and want to make sure it's higher than the swim platform when I mount the enclosure, you know, so the boat still fits in the garage in the spring. Picture below has the measurement I'm looking for.

1733240464573.png

Suppose I could estimate off the light switch that I can still measure (It didn't move :D), but hoping someone can provide a verification of that height.

Any help?!?
 
I'm doing a vessel safety exam on a 2017 SX195 today after work. If the owner is ok with it, I will see if I can get a measurement since the boat is on the trailer at their house.
 
I am sure there is code to follow, but typically the top of 120v outlet boxes are mounted at 18" above finished floor. However your new 240v outlet, I assume surface mounted, not recessed, would be on the same level/height as the light switch, 48" aff.
 
I'm doing a vessel safety exam on a 2017 SX195 today after work. If the owner is ok with it, I will see if I can get a measurement since the boat is on the trailer at their house.
Awesome. Thank you sir!

I am sure there is code to follow, but typically the top of 120v outlet boxes are mounted at 18" above finished floor. However your new 240v outlet, I assume surface mounted, not recessed, would be on the same level/height as the light switch, 48" aff.
Intention was to recess mount a weather resistant receptacle. Is that a bad idea?

I think that switch pictured is 48in AFF in relation to the floor in the house, not the floor in the garage. I'll check when I get home tonight and report back.
 
I came up with 44” last night.
 
Back
Top