• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Oil filter issues

scokill

Jetboaters Admiral
Messages
1,577
Reaction score
1,185
Points
272
Location
Rowlett, TX
Boat Make
Yamaha
Year
2008
Boat Model
AR
Boat Length
23
That's the part number I have seen on jetboaters.net, but the K&N website shows a KN-204. Any idea what the difference is?
303 is 10mm longer. I've read that on different motors it's just for clearances purposes but clearance isn't an issue with out boats.
 

betterwhenitswetter

Jet Boat Addict
Messages
77
Reaction score
25
Points
117
Location
DFW, TX
Boat Make
Yamaha
Year
2008
Boat Model
AR
Boat Length
23
researched, I tried both on my 2008 MR1's they both fit.
K&N 303 for MR-1 engines 2007 & below, 10mm longer as per scokill above my post. (I use the 303's for my boat & PWC's)
K&N 204 for MR-1 2008 & up

and from others said above:
K&N HP 1002 for 1.8 engines.
 
Top