Boat Stuff Parting out a 2017 AR240

[Ronnie]

The hull is a complete loss. The pumps, impellers and nozzles are already gone.

I am keeping the engines, ecms, windshields and one captains chair and selling what’s left.

Asking 50% off the current yamaha sports plaza or partszilla prices plus actual shipping costs from 94505. Local pick up also available.

Parts sold on an as is and first come first served basis, if you have already reserved some parts you will have right of first refusal.

Let me know if you are interested in anything. Pics available on request. I will add more pics as I take parts off of the boat.

 

[Hilario Perez]

Do you still have the Stern ladder? If so, how much would you like for it?

 

[Ronnie]

Do you still have the Stern ladder? If so, how much would you like for it?

$160 plus actual shipping, keep reading for details.

Thanks for your interest and for asking about the cost. I forgot to mention the last part of my pricing structure. If you can find the part online for less than yamahasportsplaza or partzilla sells it for the price is 25% off the online used price or 50% off of the online new price. Here YSP sells it for $498, there is currently an new one on eBay for $319, 50% off of that is $159.50.

I would sell it to you for $160 plus actual shipping of your choice. Let me know if you want it at this price, if so the zip code you want it shipped to and the method of shipping (e.g., usps regular handling but insured or ups next day air). I will box it and get the actual shipping cost for you.

Two more clarifications:
1. I will include small items already attached to the part being purchased at no additional cost, for instance here the rubber strap is which secured the ladder in its stowed position. YSP charges $33 for it.
2. If you ask me for pricing via this thread I will respond via this thread. If you send me a DM/start private a conversation with me, I will respond via the conversation.

 

[BigAbe75]

@Ronnie I’m still interested in the cushion that makes up the back rest in the bow seating area, when using the forward facing bench configuration across the bow. I believe it is probably the same part number as the cushion that goes down in the forward most configuration when making the sun pad in the bow

Also, a table leg.

I will research pricing a bit and see if what I come up with jives with your outline above.

Thanks!

 

[Ronnie]

@Ronnie I’m still interested in the cushion that makes up the back rest in the bow seating area, when using the forward facing bench configuration across the bow. I believe it is probably the same part number as the cushion that goes down in the forward most configuration when making the sun pad in the bow

Also, a table leg.

I will research pricing a bit and see if what I come up with jives with your outline above.

Thanks!

Take a look at the pics and see if you can I’d it there. The starboard / backboard is cracked on at least one of the three bow center/filler cushions.

if you can’t id in the pics I will go take some more, let me know.

 

[BigAbe75]

Take a look at the pics and see if you can I’d it there. The starboard / backboard is cracked on at least one of the three bow center/filler cushions.

if you can’t id in the pics I will go take some more, let me know.

@Ronnie Are these 2 cushions the same? They appear to be... if so, I think that's the one that I'm looking for. Do they still have the tags? Are they part number F3F-U372F-40-00 ?

Partzilla has that piece listed at $300. Yamaha F3F-U372F-40-00 - CUSHION 5 | Partzilla.com

All 3 cushions aren't the same, are they? If so, then this may not be what I need. I know the cushions I have are cut differently.

The diagram I'm looking at looks like it should be #39 in the graphic. But, I'm not 100% convinced as I don't see the other bow cushions on this diagram.



Thoughts? Thanks so much!

PS. Did you say whether you had a table leg, too? I didn't see it in the grass.

 

[Ronnie]

@BigAbe75 , I will pull and take more detailed pics of the cushions later today. Two of the cushions are the same l, one is different in that it does not have retention tabs / wings On it’s star/backing board.
I have a table leg but don’t know which one if the boat came with two originally (like my 2010 did).
The mounts are still installed so I’ll pull it to see if it fits/table sits correctly in one of both mounting spots.

 

[BigAbe75]

@BigAbe75 , I will pull and take more detailed pics of the cushions later today. Two of the cushions are the same l, one is different in that it does not have retention tabs / wings On it’s star/backing board.
I have a table leg but don’t know which one if the boat came with two originally (like my 2010 did).
The mounts are still installed so I’ll pull it to see if it fits/table sits correctly in one of both mounting spots.

Cool. I'm looking for one of the 2 cushions... whichever one is in better condition, please.

If it came with 2 table legs, they were probably the same. But, I suspect it just came with one leg. I don't want the whole table top and everything. If you'd prefer to try to sell the leg and top etc as a set, that's fine too. But, I doubt the leg would add much to the cost of shipping the cushion if we could consolidate.

#8 here, listed at $205.




Once we come up with a total, let me know and I'll verify with the admiral that funds can be released for this endeavor.

I'll start a DM to include my address info.

 

[CraigAR]

Hi Ronnie, do you still have this port side cushion?

 

[Ronnie]

@CraigAR , yes I do. I will try to take and post more detailed pics of it later today.

 

[CraigAR]

@CraigAR , yes I do. I will try to take and post more detailed pics of it later today.

Thank you sir

 

[Ronnie]

Here you go, pics of both jump seat filler cushions.

 

[Ronnie]

Here are additional pics of parts I’m selling or will be selling soon. like all of the cushions except two filler cushions from the 2017 ar 240 (including the copilots captains chair not pictured), the speedos, connext display, control wheel, battery switching and charging system and misc hardware. like the clean out plugs, ladders, anchor laddder hatch, cleats, grab rails, the wake tower. Polk stereo (just the box not the control / display). The trailer is also for sale.

I will also be selling the intermediate bearings, a complete engine with wiring harness, both ecms / electrical boxes as well as the captains chair from my 2010 242 LS.


let me know if you are interested in any of thesw parts.

 

[Hilario Perez]

How is the condition of your captains chair and what are you going to be asking for it?

 

[Ronnie]

How is the condition of your captains chair and what are you going to be asking for it?

I have two chairs one from the 2010 with a bolster and a co captains chair from the 2017 without a bolster but with a higher back and arm rests that swing up and out of the way, both are in good condition no rips or tears. I’d take $100 for the 2010 and $200 for the 2017 but the shipping costs would likely be a deal killer. for example, i Shipped a filler cushion that weighed 14 lbs in a 28”x28”x4” box to IL from CA recently. Ups Wanted $82. I bought a ups shipping label from pirate ship for $42. Both seats weigh a lot more are a lot larger and would need to be shipped a lot further to you in FL so I’d expect the costs to be close to $200. If you are willing to pay actual shipping and the packaging costs (i bought the box referenced above from ups for $13) I will get a shipping cost estimate from pirate ship, just need the zip code you would want the chair shipped to.

 

[Hilario Perez]

Thanks it’s 34758

 

[ks9mm]

Interested in GloveBox .. shipping to 07410 PLS PM

 

[2kwik4u]

@Ronnie NEvermind my other post in the build/teardown thread. I'm dumb and finally found this one.

What's your price on these two items circled in red ?!?!

Best I can tell they are #19 from the diagram found here



Broke mine last fall while winterizing.

Shoot me a price and I can Venmo/Zelle you the cash to cover the parts and shipping to 47122.

Thanks!

 

[Hilario Perez]

Hey Ronnie, the transom ladder if you still have it how much are you looking for and I’m in ZIP Code 34758 Florida let me know what would it cost. Thank you.

 

[Ronnie]

Hey Ronnie, the transom ladder if you still have it how much are you looking for and I’m in ZIP Code 34758 Florida let me know what would it cost. Thank you.

I still have it and want to sell it but don’t have time to price it or get it ready to ship right now. Briefly stated, I’m asking half of the new online price. I use yamaha sports plaza for my pricing but am open to other sites’ pricing.